J.R.Barber,

Department of Mechanical Engineering

University of Michigan

2350 Hayward Street

Ann Arbor MI 48109-2125

**Tel:** (734) 936-0406
**FAX:** (734) 647-3170
**E-mail:** jbarber@umich.edu

- J.R. Barber and M. Comninou, Thermoelastic contact problems,
**in***Thermal Stresses III*(**ed.**R. Hetnarski), North Holland, Amsterdam (1989), pp.1-106. - J.R.Barber,
*Elasticity,*Springer, Dordrecht, 3rd edn. (2010), 534pp. - J.R.Barber and M.Ciavarella, Contact Mechanics,
**in***Research Trends in Solid Mechanics*, (**ed.**G.Dvorak), Int.J.Solids Structures, Vol.37 (2000), pp.29-43. - J.R.Barber,
*Intermediate Mechanics of Materials*, Springer, Dordrecht, 2nd edn. (2011), 618pp. - J.R.Barber, Instability of thermoelastic contact,
**in**Joao A.C.Martins and Michel Raous,**eds.,***Friction and Instabilities*, Springer-Verlag, Vienna, 2002, pp. 1-37. - Yun-Bo Yi, J.R.Barber and D.L.Hartsock, Thermoelastic
instabilities in automotive disc Brakes - Finite element
analysis and experimental verification,
**in**J.A.C.Martins and Manuel D.P.Monteiro Marques**eds.,***Contact Mechanics*, Kluwer, Dordrecht, (2002), pp. 187-202. - L.-E.Andersson, A.Klarbring, J.R.Barber and M.Ciavarella, Thermoelastic contact with frictional heating,
**in**P.Alart, O.Maissonneuve and R.T.Rockafellar,**eds.,***Nonsmooth Mechanics and Analysis -- Theoretical and Numerical Advances*, Springer-Verlag, Vienna, 2006, pp. 1--37. - J.R.Barber and P.Hild, On wedged configurations with Coulomb friction,
**in**Peter Wriggers and Udo Nackenhorst,**eds.,**,*Analysis and Simulation of Contact Problems*, Springer-Verlag, Berlin, 2006, pp. 205--213. - J.R.Barber, Linear elasto-statics,
**in***Continuum Mechanics*, Jose Merodio and Giuseppe Saccomandi**eds.**, in Encyclopedia of Life Support Systems (EOLSS), Developed under the Auspices of the UNESCO, Eolss Publishers, Oxford ,UK (2008), [http://www.eolss.net]

- J.R. Barber, The influence of thermal expansion on the friction
and wear process,
*Wear*, Vol. 10 (1967), pp. 155-159. - J.R. Barber, The distribution of heat between sliding surfaces,
*Journal of Mechanical Engineering Science,*Vol. 9 (1967), pp. 351-354. - J.R. Barber and K. Wright, The thermal distortion due to a uniform
circular heat source on the surface of a semi-infinite solid,
*International Journal of Mechanical Sciences*Vol. 9 (1967), pp. 811-815. - J.R. Barber, Heat transfer at the interface of dissimilar metals -
the influence of thermal strain,
*International Journal of Heat and Mass Transfer*, Vol. 11 (1968), pp. 617-618. - J.R. Barber, Thermoelastic instabilities in the sliding of conforming
solids,
*Proceedings of the Royal Society of London*, Vol. A 312 (1969), pp. 381-394. - J.R. Barber, The conduction of heat from sliding solids,
*International Journal of Heat and Mass Transfer*, Vol. 13 (1970), pp. 857-869. - J.R. Barber, The effect of thermal distortion on constriction resistance,
*International Journal of Heat and Mass Transfer*, Vol. 14 (1971), pp. 751-766. - J.R. Barber, The solution of heated punch problems by point source methods,
*International Journal of Engineering Science*, Vol. 9 (1971), pp. 1165-1170. - J.R. Barber, Thermal contact resistance,
*International Journal of Heat and Mass Transfer,*Vol. 14 (1971), pp. 331-332. - J.R. Barber, Distortion of the semi-infinite elastic solid due to transient surface heating,
*International Journal of Mechanical Sciences*, Vol. 14 (l972), pp. 377-393. - J.R. Barber, Indentation of the semi-infinite elastic solid by a hot sphere,
*International Journal of Mechanical Sciences*, Vol. 15 (1973), pp. 813-819. - J.R. Barber, Frictionally excited thermoelastic instabilities,
*Wear*, Vol. 26 (1973), pp. 425-427. - J.R. Barber, Some mixed boundary value problems for the semi-infinite
elastic solid subjected to tangential surface
tractions,
*International Journal of Mechanical Sciences*, Vol. 16 (1974), pp. 727-734. - J.R. Barber, Determining the contact area in elastic indentation
problems,
*Journal of Strain Analysis*, Vol. 9 (1974), pp. 230-232. - J.R. Barber, The penny-shaped crack in shear and related contact problems,
*International Journal of Engineering Science*, Vol. 13 (1975), pp. 815-829. - J.R. Barber, Steady-state thermal stresses in an elastic
solid containing an insulated penny-shaped crack,
*Journal of Strain Analysis,*Vol. 10 (1975), pp. 19-24. - J.R.Barber, Thermoelastic contact of a rotating sphere and a half-space,
*Wear*, Vol. 35 (1975), pp. 283-289. - J.R.Barber, Some thermoelastic contact problems involving
frictional heating,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 29 (1976), pp. 1-13. - N. Maw, J.R. Barber and J.N. Fawcett, The oblique impact of elastic spheres,
*Wear*, Vol. 38 (1976), pp. 101-114. - J.R. Barber, Thermal rectification due to distortions induced
by heat fluxes across contacts between smooth surfaces,
*Journal of Mechanical Engineering Science*, Vol. 18 (1976), pp. 256-259. - J.R. Barber, Indentation of the semi-infinite elastic solid by a concave rigid punch,
*Journal of Elasticity*, Vol. 6 (1976), pp. 149-159. - J.R. Barber, The disturbance of a uniform steady-state heat flux by a partially conducting plane crack,
*Int. J. Heat Mass Transfer*, Vol. 19 (1976), pp. 956-958. - J.R. Barber, The effect of heat flow on the contact area between a continuous rigid punch and a frictionless elastic half-space,
*Zeitschrift fur angewandte Mathematik und Physik*, Vol. 27 (1976), pp. 439-445. - N. Maw, J.R. Barber and J.N. Fawcett, The rebound of elastic bodies in oblique impact,
*Mechanics Research Communications*, Vol. 4 (1977), pp. 17-22. - J.R. Barber, Force and displacement influence functions for the circular ring,
*Journal of Strain Analysis*, Vol. 13 (1978), pp. 77-81. - J.R. Barber, Contact problems involving a cooled punch,
*Journal of Elasticity*, Vol. 8 (1978), pp. 409-423. - J.R.Barber, Adhesive contact during the oblique impact of elastic spheres,
*Zeitschrift fur angewandte Mathematik und Physik*, Vol. 30 (1979), pp. 468-476. - J.R. Barber, Bending of an incomplete annular plate and related problems,
*Journal of Strain Analysis*, Vol. 14 (1979), pp. 103-109. - J.R. Barber, Steady-state thermal stresses caused by an
imperfectly conducting penny-shaped crack in an elastic
solid,
*Journal of Thermal Stresses*, Vol. 3 (1979), pp. 77-83. - J.R. Barber, The transient thermoelastic contact of a sphere sliding on a plane,
*Wear*, Vol. 59 (1980), pp. 21-29. - J.R. Barber, The rolling contact of misaligned elastic cylinders,
*Journal of Mechanical Engineering Science*, Vol. 22 (1980), pp. 125-128. - J.R. Barber, J. Dundurs and M. Comninou, Stability considerations in thermoelastic contact,
*ASME Journal of Applied Mechanics*, Vol. 47 (1980), pp. 871-874. - J.R. Barber, Some implications of Dundurs' theorem for thermoelastic
contact and crack problems,
*Journal of Mechanical Engineering Science*, Vol. 22 (1980), pp. 229-232. - N. Maw, J.R. Barber and J.N. Fawcett, The role of elastic
tangential compliance in oblique impact,
*ASME Journal of Lubrication Technology*, Vol. 103 (1981), pp. 74-80. - M. Comninou, J. Dundurs and J.R. Barber, Planar Hertz contact
with heat conduction,
*ASME Journal of Applied Mechanics*, Vol. 48 (1981), pp. 549-554. - J.R. Barber, Stability of thermoelastic contact for the Aldo
model,
*ASME Journal of Applied Mechanics*, Vol. 48 (1981), pp. 555-558. - M. Comninou, J.R. Barber and J. Dundurs, Heat conduction
through a flat punch,
*ASME Journal of Applied Mechanics*, Vol. 48 (1981), pp. 871-875. - J.R. Barber and M. Comninou, The external axisymmetric
interface crack with heat flow,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 35 (1982), pp. 403-417. - J.R. Barber and C.J. Martin-Moran, Green's functions for transient thermoelastic contact problems for the half-plane,
*Wear*, Vol. 79 (1982), pp. 11-19. - M. Comninou, J.R. Barber and J. Dundurs, Disturbance at a
frictional interface caused by a plane elastic pulse,
*ASME Journal of Applied Mechanics*, Vol. 49 (1982), pp. 361-365. - J.R. Barber, M. Comninou and J. Dundurs, Contact transmission of wave motion between two solids with an initial gap,
*International Journal of Solids and Structures*, Vol. 18 (1982), pp. 775-781. - M. Comninou and J.R. Barber, The plane external crack,
*International Journal of Engineering Science*, Vol. 20 (1982), pp. 695-696. - J.R. Barber and M. Comninou, Rolling of elastic cylinders with friction at supersonic speed,
*International Journal of Solids and Structures*, Vol. 18 (1982), pp. 783-789. - J.R. Barber, Indentation of an elastic half space by a cooled
flat punch,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 35 (1982), pp. 141-154. - G.M.L. Gladwell, J.R. Barber and Z. Olesiak, Thermal problems
with radiation boundary conditions,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 36 (1983), pp. 387-401. - G.M.L. Gladwell and J.R. Barber, Thermoelastic contact problems with radiation boundary conditions,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 36 (1983), pp. 403-417. - J.R. Barber, The distortion of a cylinder with non-uniform
axial heat conduction,
*Journal of Elasticity*, Vol. 13 (1983), pp. 441-447. - M. Comninou, J.R. Barber and J. Dundurs, Interface slip caused by a surface load moving at constant speed,
*International Journal of Mechanical Sciences*, Vol. 25 (1983), pp. 41-46. - M. Comninou and J.R. Barber, Frictional slip between a layer and a substrate due to a periodic surface force,
*International Journal of Solids and Structures*, Vol. 19 (1983), pp. 533-539. - C.J. Martin-Moran, J.R. Barber and M. Comninou, The penny-shaped interface crack with heat flow: I Perfect contact,
*ASME Journal of Applied Mechanics*, Vol. 50 (1983), pp. 29-36. - J.R. Barber and M. Comninou, The penny-shaped interface crack with heat flow: II Imperfect contact,
*ASME Journal of Applied Mechanics*, Vol. 50 (1983), pp. 770-776. - F-K. Chang, M. Comninou and J.R. Barber, Slip between a layer and a substrate caused by a normal force moving steadily
over the surface,
*International Journal of Mechanical Sciences*, Vol. 25 (1983), pp. 803-809. - J.R. Barber, The solution of elasticity problems for the
half-space by the method of Green and Collins,
*Applied Scientific Research*, Vol. 40 (1983), pp. 135-157. - J.R. Barber, A four-part boundary value problem in elasticity
-indentation by a discontinuously concave punch,
*Applied Scientific Research*, Vol. 40 (1983), pp. 159-167. - J.R. Barber, Some polynomial solutions for the non-axisymmetric Boussinesq problem,
*J.Elasticity*, Vol. 14 (1984), pp. 217-221. - F.-K. Chang, M. Comninou, S. Sheppard, and J.R. Barber, The
sub-surface crack under conditions of slip and stick caused by a surface normal force,
*ASME Journal of Applied Mechanics*, Vol. 51 (1984), pp. 311-316. - M. Comninou and J.R. Barber, The thermoelastic Hertz problem with pressure dependent contact resistance,
*International Journal of Mechanical Sciences*, Vol. 26 (1984), pp. 549-554. - J.R. Barber, Thermoelastic displacements and stresses due to
a heat source moving over the surface of a half plane,
*ASME Journal of Applied Mechanics*, Vol. 51 (1984), pp. 636-640. - G.A. Berry and J.R. Barber, The division of frictional heat
-A guide to the nature of sliding contact,
*ASME Journal of Tribology,*Vol. 106 (1984), pp. 405-415. - D.A. Hills and J.R. Barber, Steady motion of an insulating rigid flat-ended punch over a thermally conducting half-plane,
*Wear*, Vol. 102 (1985), pp. 15-22. - A. Azarkhin and J.R. Barber, Transient thermoelastic contact problem of two sliding half-planes,
*Wear*, Vol. 102 (1985), pp. 1-13. - S.D. Sheppard, J.R. Barber, and M. Comninou, Short subsurface
cracks under conditions of slip and stick caused by a moving
compressive load,
*ASME Journal of Applied Mechanics*, Vol. 52 (1985), pp. 811-817. - J.R. Barber, T.W. Beamond, J.R. Waring, and C. Pritchard,
Implications of thermoelastic instability for the design of
brakes,
*ASME Journal of Tribology*, Vol. 107 (1985), pp. 206-210. - A. Azarkhin and J.R. Barber, On partial contact of a thin-walled circular cylinder and a rigid half-space,
*International Journal of Mechanical Sciences*, Vol. 27 (1985), pp. 551-557. - J.R. Barber, Responses of continuous inertialess beams to
traversing mass,
*International Journal of Mechanical Sciences*, Vol. 27 (1985), pp. 693-694. - J.R. Barber and N. Triantafyllidis, Effect of debonding on
the stability of fiber reinforced composites,
*ASME Journal of Applied Mechanics*, Vol. 52 (1985), pp. 235-236. - J.R. Barber, Non-uniqueness and stability for heat conduction
through a duplex heat exchanger tube,
*Journal of Thermal Stresses*, Vol. 9 (1986), pp. 69-78. - J.R. Barber, The influence of interface thermal contact resistance on the heat transfer performance of prestressed
duplex tube,
*International Journal of Heat and Mass Transfer*, Vol. 29 (1986), pp. 761-767. - S.D. Sheppard, D.A. Hills, and J.R. Barber, An analysis offretting cracks - II: Unloading and reloading phases,
*International Journal of Solids and Structures*, Vol. 22 (1986), pp. 387-396. - D.A. Hills and J.R. Barber, Steady sliding of a circular cylinder over a dissimilar thermally conducting half-plane,
*International Journal of Mechanical Sciences*, Vol. 28 (1986), pp. 613-622. - A. Azarkhin and J.R. Barber, Thermoelastic instability for
the transient contact problem of two sliding half-planes,
*ASME Journal of Applied Mechanics*, Vol. 53 (1986), pp. 565-572. - S.D. Sheppard, J.R. Barber and M. Comninou, Subsurface cracks
under conditions of slip, stick and separation caused by a moving compressive load,
*ASME Journal of Applied Mechanics*, Vol. 54 (1987), pp. 393-398. - A. Azarkhin and J.R. Barber, Transient contact of two sliding half-planes with wear,
*ASME Journal of Tribology*, Vol. 109 (1987), pp. 598-603. - J.R. Barber, Thermoelastic distortion of the half-space,
*Journal of Thermal Stresses*, Vol. 10 (1987), pp. 221-228. - F.A. Sturla and J.R. Barber, Thermoelastic Green's functions
for plane problems in general anisotropy,
*ASME Journal of Applied Mechanics*, Vol. 55 (1988), pp. 245-247. - A. Azarkhin and J.R. Barber, Green's functions for subsurface
thermal stresses due to surface heating,
*Journal of Thermal Stresses*, Vol. 11 (1988), pp. 1-16. - J.R.Barber and Ronggang Zhang, Transient behaviour and stability for the thermoelastic contact of two rods of dissimilar
materials,
*International Journal of Mechanical Sciences*, Vol. 30 (1988), pp. 691-704. - F.A. Sturla and J.R. Barber, Thermal stresses due to a plane
crack in a general anisotropic material,
*ASME Journal of Applied Mechanics*, Vol. 55 (1988), pp. 372-376. - A.Azarkhin, J.R.Barber and R.L.Rolf, Combined effects of
mechanical and frictionally induced thermal stresses in
sliding,
*Key Engineering Materials*, Vol. 33 (1989), pp. 135-158. - J.R.Barber, An asymptotic solution for short time transient heat conduction between two similar contacting bodies,
*International Journal of Heat and Mass Transfer*, Vol. 32 (1989), pp. 943-949. - Nai-Yi Li and J.R.Barber, Sinusoidal perturbation solutions for planar solidification,
*International Journal of Heat and Mass Transfer*, Vol. 32 (1989), pp. 935-941. - Ronggang Zhang and J.R.Barber, Effect of material properties
on the stability of static thermoelastic contact,
*ASME Journal of Applied Mechanics*, Vol. 57 (1990), pp. 365-369. - J.R.Barber, Contact problems for the thin elastic layer,
*International Journal of Mechanical Sciences*, Vol. 32 (1990), pp. 129-132. - J.R.Barber and D.A.Billings, An approximate solution for the contact area and elastic compliance of a smooth punch of arbitrary shape,
*International Journal of Mechanical Sciences,*Vol. 32 (1990), pp. 991-997. - J.R.Barber, Some anomalies of the curved bar problem in classical elasticity,
*Journal of Elasticity*, Vol. 26 (1991), pp. 75-86. - Nai-Yi Li and J.R.Barber, Thermoelastic instability in planar solidification,
*International Journal of Mechanical Sciences*, Vol. 33 (1991), pp. 945-959. - Taein Yeo and J.R.Barber, Stability of thermoelastic contact of a
layer and a half-plane,
*Journal of Thermal Stresses*, Vol. 14 (1991), pp. 371-388. - H.G.Georgiadis, J.R.Barber and F.Ben Ammar, An asymptotic
solution for short time transient heat conduction between two dissimilar contacting bodies,
*Quarterly Journal of Mechanics and Applied Mathematics*, Vol. 44 (1991), pp. 303-322. - Chongdu Cho, J.W.Holmes and J.R.Barber, Estimation of
interfacial shear in ceramic composites from frictional
heating measurements,
*Journal of the American Ceramic Society*, Vol. 74 (1991), pp. 2802-2808. - J.R.Barber, Generalized beam theory
applied to shear stiffness,
*International Journal of Solids and Structures*, Vol. 29 (1992), pp. 1453-1455. - Xiaoping Lu, J.R.Barber and Maria Comninou, Stress concentration due to an array of hemispherical cavities at the surface of an elastic half-space,
*Journal of Elasticity*, Vol. 28 (1992), pp. 111-122. - J.R.Barber and F.A.Sturla, Application of the reciprocal theorem to some problems for the elastic half-space,
*Journal of the Mechanics and Physics of Solids*, Vol. 40 (1992), pp. 17-25. - Chongdu Cho, J.W.Holmes and J.R.Barber, Distribution of
matrix cracks in a uniaxial ceramic composite,
*Journal of the American Ceramic Society*, Vol. 75 (1992), pp. 316-324. - Nai-Yi Li, L.G.Hector, Jr. and J.R.Barber, Theories
of thermoelastic instability during solidification based on
the Neumann temperature solution,
*Journal of Thermal Stresses*, Vol. 15 (1992), pp. 265-293. - F.Ben Ammar, M.Kaviany and J.R.Barber, Heat transfer during impact,
*International Journal of Heat and Mass Transfer*, Vol. 35 (1992), pp. 1495-1506. - H.G.Georgiadis and J.R.Barber, On the super-Rayleigh/subseismic elastodynamic indentation problem,
*Journal of Elasticity*, Vol. 31 (1993), pp. 141-161. - H.G.Georgiadis and J.R.Barber, Steady-state transonic motion of a line load over an elastic half-space (The corrected Cole/Huth solution),
*ASME Journal of Applied Mechanics,*Vol. 60 (1993), pp. 772-774.**There is a typo in this paper, corrected in**Erratum - D.A.Hills and J.R.Barber, Interface cracks,
*International Journal of Mechanical Sciences*, Vol. 35 (1993), pp. 27-37. - Ronggang Zhang and J.R.Barber, Transient thermoelastic
contact and stability of two thin-walled cylinders,
*Journal of Thermal Stresses*, Vol. 16 (1993), pp. 31-54. - Kwangjin Lee and J.R.Barber, Frictionally-excited
thermoelastic instability in automotive disk brakes,
*ASME Journal of Tribology*, Vol. 115 (1993), pp. 607-614. - Kwangjin Lee and J.R.Barber, The effect of shear
tractions on frictionally-excited thermolelastic instability,
*Wear*, Vol. 160 (1993), pp. 237-242. - Faruk Yigit, Nai-Yi Li and J.R.Barber, Effect of thermal capacity
on thermoelastic instability during the solidification of
pure metals,
*Journal of Thermal Stresses*, Vol. 16 (1993), pp. 285-309. - Taein Yeo and J.R.Barber, Finite element analysis
of thermoelastic contact stability,
*ASME Journal of Applied Mechanics*Vol. 61 (1994), pp. 919-922. - Kwangjin Lee and J.R.Barber, An experimental investigation of frictionally-excited instability in automotive disk brakes under a drag brake application,
*ASME Journal of Tribology*, Vol. 116 (1994), pp. 409-414. - Faruk Yigit and J.R.Barber, Effect of Stefan number on thermoelastic instability in unidirectional solidification,
*International Journal of Mechanical Sciences,*Vol. 36 (1994), pp. 707-723. - Kwangjin Lee and J.R.Barber, Discussion on the paper
`Non-axisymmetric effects for 3D thermal analysis of a brake',
A.Floquet and M.C.Dubourg,
*ASME Journal of Tribology*, Vol. 116 (1994), pp. 407-408. - Louis G. Hector, Jr., Nai-Yi Li and J.R.Barber, Strain rate
relaxation effect on freezing front growth instability during planar
solidification of pure metals. Part 1. Uncoupled theory,
*Journal of Thermal Stresses*, Vol. 17 (1994), pp. 619-646. - C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Acoustic
Emission investigation of cold cracking in gas metal arc welding
of AISI 4340 steel,
*Welding Journal.*, Vol. 74 (1995), pp. 177-s-184-s. - Taein Yeo and J.R.Barber, Stability of a semi-infinite strip in thermoelastic contact with a rigid wall,
*International Journal of Solids and Structures*, Vol. 32 (1995), pp. 553-567. - Nai-Yi Li, Louis G. Hector, Jr.and J.R.Barber, Strain rate
relaxation effect on freezing front growth instability during planar
solidification of pure metals. Part 2. Coupled theory,
*Journal of Thermal Stresses*, Vol. 18 (1995), pp. 69-85. - Mujibur Rahman and J.R.Barber, Exact expressions for the roots of the secular equation for Rayleigh waves,
*ASME Journal of Applied Mechanics*, Vol. 62 (1995), pp. 250-252. - Jose R. Ruiz Ayala, Kwangjin Lee, Mujibur Rahman, and J.R.Barber, Effect of intermittent contact on the stability of thermoelastic sliding contact,
*ASME Journal of Tribology*, Vol. 118 (1996), pp. 102-108. - J.R.Barber, Surface Displacements due to a Steadily Moving Point Force,
*ASME Journal of Applied Mechanics*, Vol. 63 (1996), pp. 245-251. - Taein Yeo and J.R.Barber, Finite element analysis of the stability
of static thermoelastic contact,
*Journal of Thermal Stresses*, Vol. 19 (1996), pp. 169-184. - C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Crack-tip
equation of motion due to non-uniform residual stresses in a
weldment,
*Welding Journal*, Vol 76 (1997), pp.374-s-382-s. - C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Far-field
initial response of acoustic emission from cracking in
a weldment,
*ASME Journal of Manufacturing Science and Engineering,*Vol. 119 (1997), pp. 281-289. - Chuan Li and J.R.Barber, Stability of thermoelastic contact of two
layers of dissimilar materials,
*Journal of Thermal Stresses*, Vol. 20 (1997), pp. 169-184. - Shuqin Du, P.Zagrodzki, J.R.Barber and G.M.Hulbert, Finite element
analysis of frictionally-excited thermoelastic instability,
*Journal of Thermal Stresses*, Vol. 20 (1997), pp. 185-201. - José Castillo and J.R.Barber, Contact problems involving beams,
*Proceedings of the Royal Society (London)*, Vol. A 453 (1997), pp. 2397-2412. - Hanbum Cho and J.R.Barber, Dynamic behavior and stability of simple frictional systems,
*Mathematical and Computer Modeling*, Vol. 28 (1998), pp. 37-53. - Chuan Li and J.R.Barber, Thermoelastic stability of duplex heat exchanger tubes,
*International Journal of Mechanical Sciences*, Vol. 40 (1998), pp. 575-588. - N. Chawla, Y.K. Tur, J.W. Holmes, J.R. Barber, and A. Szweda, High Frequency Fatigue Behavior of Woven Fiber Fabric Reinforced Polymer-Derived Ceramic Matrix Composites,
*Journal of the American Ceramic Society*, (1998) Vol. 81, pp. 1221-1230. - D.Joachim-Ajao and J.R.Barber, Effect of material properties in certain thermoelastic contact problems,
*ASME Journal of Applied Mechanics*, Vol. 65 (1998), pp.889-893. - Nadine Audebert, J.R.Barber and P.Zagrodzki, Buckling of automatic transmission clutch plates due to thermoelastic/plastic residual stresses,
*Journal of Thermal Stresses*, Vol. 21 (1998), pp. 309-326. - M. J. Leamy, J. R. Barber and N. C. Perkins, Distortion of a harmonic elastic wave reflected from a dry frictional support,
*ASME Journal of Applied Mechanics*, Vol. 65 (1998), pp. 851-857. - Yong Hoon Jang, J. R. Barber and S. Jack Hu, Electrical conductance between dissimilar materials with temperature-dependent properties,
*Journal of Physics D Applied Physics*, Vol 31 (1998), pp. 3197-3205. - Hanbum Cho and J. R. Barber, Stability of the three-dimensional Coulomb friction law,
*Proceedings of the Royal Society (London)*, Vol. A 455 (1999), pp. 839-861. - Yun-Bo Yi, Shuqin Du, J. R. Barber and J. W. Fash, Effect of geometry on thermoelastic instability in disk brakes and clutches,
*ASME Journal of Tribology*, Vol. 121 (1999), pp. 661-666. - J. R. Barber and L. G. Hector, Thermoelastic contact problems for the layer,
*ASME Journal of Applied Mechanics*, Vol. 66 (1999), pp. 806-809. - J.R.Barber, Thermoelasticity and contact,
*Journal of Thermal Stresses,*Vol. 22 (1999), pp. 513-525. - J.R.Barber and M.Ciavarella, Contact Mechanics,
**in***Research Trends in Solid Mechanics*, (**ed.**G. Dvorak), International Journal of Solids and Structures, Vol.37 (2000), pp.29-43. - M.Ciavarella, G.Demelio, J.R.Barber and Yong Hoon Jang,
Linear elastic contact of the Weierstrass profile,
*Proceedings of the Royal Society (London)*, Vol. A 456 (2000), pp. 387-405. - Yun-Bo Yi, J.R.Barber and P.Zagrodzki,
Eigenvalue Solution of Thermoelastic Instability Problems using Fourier Reduction,
*Proceedings of the Royal Society (London)*, Vol. A 456 (2000), pp. 2799-2821. - P.Zagrodzki, K.B.Lam, E.Al-Bahkali and J.R.Barber, Nonlinear transient behaviour of a sliding system with frictionally
excited thermoelastic instability,
*ASME Journal of Tribology*, Vol. 123 (2001), pp. 699-708. - Fotini V.Katopodes, J.R.Barber and Yansong Shan,
Torsional deformation of an endoscope probe,
*Proceedings of the Royal Society (London)*, Vol. A 457 (2001), pp. 2491-2506. - Shiqing Fan and J.R.Barber, Solution of periodic heating problems by the transfer matrix method,
*International Journal of Heat and Mass Transfer*, Vol 45 (2002), pp.1155-1158. - A.Sackfield, J.R.Barber, D.A. Hills and C.E.Truman,
A shrink-fit shaft subject to torsion,
*European Journal of Mechanics A-Solid*, Vol.21 (2002), pp.73-84. - Abdullah Al-Shabibi and J.R.Barber, Transient solution of a two-dimensional TEI problem using a reduced order model,
*International Journal of Mechanical Sciences*, Vol.44 (2002), pp.451-464. - J.R.Barber, K.Grosh and Sejoong Oh, Energy considerations in systems with varying stiffness,
*ASME Journal of Applied Mechanics,*Vol.70 (2003), pp.465--469. - J.R.Barber, Bounds on the electrical resistance between contacting elastic rough bodies,
*Proceedings of the Royal Society (London)*, Vol. A 459 (2003), pp. 53-66. - A.Sackfield, A.Mugadu, J.R.Barber and D.A.Hills, The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts,
*Journal of the Mechanics and Physics of Solids*, Vol. 51 (2003), pp.1333--1346. - J.J.Vlassak, M.Ciavarella, J.R.Barber and X.Wang, The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape,
*Journal of the Mechanics and Physics of Solids*, Vol. 51 (2003), pp.1701--1721. - M.Ciavarella, L. Johansson, L.Afferrante, A.Klarbring and J.R.Barber, Interaction of thermal contact resistance and frictional heating in thermoelastic instability,
*International Journal of Solids and Structures*, Vol 40 (2003), pp. 5583--5597. - Yong Hoon Jang and J.R.Barber, Effect of contact statistics on electrical contact resistance,
*Journal of Applied Physics,*Vol 94 (2003) , pp.7215--7221. - A.Mugadu, D.A.Hills, J.R.Barber and A.Sackfield, The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts,
*International Journal of Solids and Structures,*Vol.41 (2004), pp.385-397. - M.Ciavarella, G. Murolo, G.Demelio and J. R. Barber, Elastic contact stiffness and contact resistance for the Weierstrass profile,
*Journal of the Mechanics and Physics of Solids,*Vol. 52 (2004), pp 1247-1265. - J.R.Barber, Stresses in a half space due to Newtonian gravitation,
*Journal of Elasticity,*Vol.75 (2004) pp.187--192. - M.Ciavarella and J. R. Barber, Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall,
*European Journal of Mechanics A (Solids),*Vol.24 (2005), pp.371--376. - Melida Chin, J.R.Barber and S.J.Hu, Effect of elastic recovery on the electrical contact resistance in anisotropic conductive adhesive assemblies,
*IEEE Transactions on Components and Packaging Technologies,*Vol.29 (2006), pp.137--144. - Jon Kadish, J.R.Barber and P.D.Washabaugh, Stresses in rotating spheres grown by accretion,
*International Journal of Solids and Structures*, Vol 42 (2005), pp. 5322-5334. - M.Upmanyu and J.R.Barber, Interrupted tubules in filamentous crystals: Elastic analysis,
*Physical Review B*, Vol.72 (2005): Art. No. 205442. - Luciano Afferante, M.Ciavarella and J.R.Barber, Sliding thermoelastodynamic instability,
*Proceedings of the Royal Society (London)*, Vol.462 (2006), pp.2161--2176. - Sejoong Oh, Karl Grosh and J.R.Barber, Energy conserving equations of motion for gear systems,
*ASME Journal of Vibration and Acoustics,*Vol.127 (2005), pp.208--212. - E.A.Al-Bahkali and J.R.Barber, Nonlinear steady state solution for a thermoelastic sliding system using finite element method,
*Journal of Thermal Stresses*, Vol.29 (2006), pp.153--168. - J.R.Barber, Three-dimensional elasticity problems for the prismatic bar
*Proceedings of the Royal Society (London)*, Vol.462 (2006), pp.1877--1896. - Donghee Lee and J.R.Barber, An automated procedure for determining asymptotic elastic fields at singular points,
*Journal of Strain Analysis*, Vol.41 (2006), pp.287--295. - M.Ciavarella, A.Baldini, J.R.Barber and A.Strozzi, Reduced dependence on loading parameters in almost conforming contacts,
*International Journal of Mechanical Sciences*, Vol. 48 (2006), pp. 917--925. - J.R.Barber, Three-dimensional elasticity solutions for isotropic and generally anisotropic bodies,
*Applied Mechanics and Materials*, Vols. 5-6 (2006) pp. 541-550. - J.R.Barber and T.C.T.Ting, Three-dimensional solutions for general anisotropy,
*Journal of the Mechanics and Physics of Solids*, Vol.55 (2007), pp. 1993--2006. - A.Klarbring, M.Ciavarella and J.R.Barber, Shakedown in elastic contact problems with Coulomb friction,
*International Journal of Solids and Structures*, Vol.44 (2007), pp.8355--8365. - Jon Kadish, J.R.Barber, P.D.Washabaugh and D.J.Scheeres, Stresses in accreted planetary bodies,
*International Journal of Solids and Structures*, Vol.45 (2008), pp.540--550. - Jon Kadish, Esteban Rougier, Ante Munjiza and J.R.Barber, Granular temperature as an energy dissipation mechanism in bodies of the Solar System,
*Proceedings of the Royal Society (London)*, Vol.463 (2007), pp.2485--2493. - J.R.Barber, A.Klarbring and M.Ciavarella, Shakedown in frictional contact problems for the continuum,
*Comptes Rendus Mecanique*, Vol.336 (2008), pp.34--41. - Jiayin Li and J.R.Barber, Solution of transient thermoelastic contact problems by the fast speed expansion method,
*Wear,*Vol.265 (2008), pp.402--410. - Donghee Lee, N.Triantafyllidis, J.R.Barber and M.D.Thouless, Surface instability of an elastic half space with material properties varying with depth,
*Journal of the Mechanics and Physics of Solids*, Vol.56 (2008), pp.858--868. - Melida Chin, S.J.Hu, and J.R.Barber, Design guidelines for anisotropic conductive adhesive assemblies in microelectronics packaging,
*ASME Journal of Electronic Packaging*, Vol.130 (2008), Issue: 2 Article Number: 021006. - Young Ju Ahn and J.R.Barber, Response of frictional receding contact problems to cyclic loading,
*International Journal of Mechanical Sciences*, Vol.50 (2008), pp.1519--1525. - M.Ciavarella and J.R.Barber, Influence of longitudinal creepage and wheel inertia on short pitch corrugation: A resonance-free mechanism to explain the roaring rails pheonomenon,
*Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology*, Vol.222 (2008), pp.171--181. - D. Dini, J.R. Barber, C.M. Churchman, A. Sackfield and D.A. Hills, The application of asymptotic solutions to contact problems characterised by logarithmic singularities,
*European Journal of Mechanics A-Solids*, Vol.27 (2008), pp.847--858. - J.R.Barber, M.Ciavarella, L.Afferrante and A.Sackfield, Effect of small harmonic oscillations during the steady rolling of a cylinder on a plane,
*International Journal of Mechanical Sciences*, Vol.50 (2008), pp.1344-1353. - Young Ju Ahn, Enrico Bertocchi, J.R.Barber, Shakedown of coupled two-dimensional discrete frictional systems,
*Journal of the Mechanics and Physics of Solids*, Vol.56 (2008), pp.3433--3440. - Abdullah Al-Shabibi and J.R.Barber, Transient solution of the unperturbed thermoelastic contact problem,
*Journal of Thermal Stresses*, Vol. 32 (2009), pp. 226--243. - Donghee Lee, J.R.Barber and M.D.Thouless, Indentation of an elastic half space with material properties varying with depth,
*International Journal of Engineering Science*, Vol.47 (2009), pp.1274--1283. - J.R.Barber, Letter to the Editor concerning ``On the torsion of a prism with non-equilateral triangular cross-section,'' by L.M.B.C. Campos and F.S.R.P. Cunha,
*International Journal of Engineering Science*, Vol. 48 (2010), p.2107. - Yong Hoon Jang, Hanbum Cho and J.R.Barber, The thermoelastic Hertzian contact problem, International Journal of Solids and Structures, Vol.46 (2009), pp.4073--4078.
- R.J.H.Paynter, D.A.Hills and J.R.Barber, Features of the stress field at the surface
of a flush shrink-fit shaft,
*Journal of Mechanical Engineering Science*, Vol.223 (2009), pp.2241--2247. - Yong Hoon Jang and J.R.Barber, Multiscale analysis of moving clusters of microcontacts,
*International Journal of Heat and Mass Transfer*, Vol.53 (2010), pp.3817-3822. - M.Kartal, D.A.Hills, D.Nowell and J.R.Barber, Torsional contact between elastically similar flat-ended cylinders,
*International Journal of Solids and Structures*, Vol.47 (2010), pp.1375--1380. - M.E.Kartal, J.R.Barber, D.A.Hills and D.Nowell, Partial slip problem for two semi-infinite strips,
*International Journal of Engineering Science*, Vol. 49 (2011), pp.203--211. - Yong Hoon Jang and J.R.Barber, Frictional energy dissipation in materials containing cracks,
*Journal of the Mechanics and Physics of Solids*, Vol. 59 (2011), pp.583--594. - Yong Hoon Jang and J.R.Barber, Effect of phase on the frictional dissipation in systems subjected to harmonically varying loads,
*European Journal of Mechanics A/Solids*, Vol.30 (2011), pp.269--274. - V. V. Meleshko, Yu. V. Tokovyi, and J. R. Barber, Axially symmetric temperature stresses in an elastic isotropic cylinder of finite length,
*Journal of Mathematical Sciences*, Vol.172 (2011), pp.1--25. - J.R.Barber, M.Davies and D.A.Hills, Frictional elastic contact with periodic loading,
*International Journal of Solids and Structures*, Vol.48 (2011), pp.2041--2047. - M.Paggi and J.R.Barber, Contact conductance of rough surfaces composed of modified RMD patches,
*International Journal of Heat and Mass Transfer*, Vol.54 (2011), pp.4664--4672. - D.A.Hills, M.Davies and J.R.Barber, An incremental formulation for half-plane contact problems subject to varying normal load, shear and tension,
*Journal of Strain Analysis*, Vol.46 (2011), pp.436-443. - J.R.Barber, Frictional systems subjected to oscillating loads,
*Annals of Solid and Structural Mechanics*, Vol.2 (2011), pp.45--55. - C.Putignano, M.Ciavarella and J.R.Barber, Frictional energy dissipation in contact of nominally flat rough surfaces under harmonically varying loads ,
*Journal of the Mechanics and Physics of Solids*, Vol. 59 (2011), pp.2442-2454. - M.Davies, J.R.Barber and D.A Hills, Energy dissipation in a frictional incomplete contact with varying normal load,
*International Journal of Mechanical Sciences*, Vol.55 (2012), pp.13-21, DOI: 10.1016/j.ijmecsci.2011.11.006. - A.Al-Shabibi and J.R.Barber, Finite element implementation of the eigenfunction series solution for transient heat conduction problems with low Biot number,
*Journal of Mechanical Engineering Science*, Vol.226 (2012), pp.1579--1588, DOI: 10.1177/0954406211423615. - J.A.Greenwood and J.R.Barber, Indentation of an elastic layer by a rigid cylinder,
*International Journal of Solids and Structures*, Vol.49 (2012), pp.2962--2977. DOI:10.1016/j.ijsolstr.2012.05.036 - D.A.Hills, A.Thaitirarot, J.R.Barber, and D.Dini, Correlation of fretting fatigue experimental results using an asymptotic approach,
*International Journal of Fatigue*, Vol. 43 (2012) pp. 62–75. - J.R.Barber, Incremental stiffness and electrical contact conductance in the contact of rough finite bodies,
*Physical Review E*, Vol. 87 (2013), Art. 013203. - J.R.Barber, Multiscale surfaces and Amontons' law of friction,
*Tribology Letters*, Vol. 49 (2013), pp.539--543. - L-E.Andersson, J.R.Barber and Y-J Ahn, Attractors in frictional systems subjected to periodic loads,
*SIAM Journal of Applied Mathematics*, Vol.73 (2013), pp.1097--1116. - J.R.Barber, Similarity considerations in adhesive contact problems,
*Tribology International*, Vol.67 (2013), pp.51--53. - Yuwei Liu, Yong Hoon Jang and J. R. Barber, Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear,
*Wear*, Vol. 309 (2014), pp. 134--138. http://dx.doi.org/10.1016/j.wear.2013.11.004 - J. R. Barber and M.Ciavarella, JKR solution for an anisotropic half space,
*Journal of the Mechanics and Physics of Solids*, Vol. 64 (2014), pp.367--376. - A.Thaitirarot, R.Flicek, D.A.Hills, and J.R.Barber, The use of static reduction in the solution of two-dimensional frictional contact problems,
*Journal of Mechanical Engineering Science*, Vol. 228 (2014), pp. 1474--1487. - Yuwei Liu and J. R. Barber, Transient heat conduction between rough sliding surfaces,
*Tribology Letters*, Vol. 55 (2014), pp. 23--33. - Xiaosun Wang and J.R.Barber, Numerical algorithms for two-dimensional dynamic frictional problems,
*Tribology International*, Vol. 80 (2014), pp. 141--146 - L-E. Andersson, J. R. Barber and A. R. S. Ponter, Existence and uniqueness of attractors in frictional systems with uncoupled tangential displacements and normal tractions,
*International Journal of Solids and Structures*, Vol. 51 (2014), pp. 3710--3714. - Jae Hyung Kim, Young Ju Ahn, Yong Hoon Jang and J. R. Barber, Contact problems involving beams,
*International Journal of Solids and Structures*, Vol. 51 (2014), pp. 4435--4439. - R. C. Flicek, D. A. Hills, J. R. Barber, and D. Dini, Determination of the shakedown limit for large, discrete frictional systems,
*European Journal of Mechanics A/Solids*, Vol. 49 (2015), pp. 242--250. - Zupan Hu, Wei Lu, M. D. Thouless and J. R. Barber, Simulation of wear evolution using fictitious thermal expansion,
*Tribology International*, Vol. 82 (2015), pp. 191--194. - A. Papangelo, M. Ciavarella and J.R.Barber, Fracture Mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws,
*Proceedings of the Royal Society of London*, Vol. A 471 (2015) Issue: 2180 Article Number: 20150271. - R. Fleury, D. A. Hills and J. R. Barber, A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part I: Contact law and normal contact considerations,
*International Journal of Solids and Structures*, Vol. 85--86 (2016), pp. 89--96. - R. Fleury, D. A. Hills and J. R. Barber, A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part II: Near-edge asymptotes and the effect of shear,
*International Journal of Solids and Structures*, Vol. 85--86 (2016), pp. 97--104. - Yongwoo Lee, Yuwei Liu, J.R.Barber and Yong Hoon Jang, Thermal considerations during transient asperity contact,
*Tribology International*, Vol. 94 (2016), pp. 87--91. - Yongwoo Lee, Yuwei Liu, J.R.Barber and Yong Hoon Jang, Thermal boundary conditions in sliding contact problem,
*Tribology International*, Vol. 103 (2016), pp. 69--72. - J. R. Barber, Nominally static frictional contacts under periodic loading,
*Journal of Strain Analysis*, Vol. 51 (2016), pp. 270-278. - Zupan Hu, Wei Lu, M. D. Thouless and J. R. Barber, Effect of plastic deformation on the evolution of wear and local stress fields in fretting,
*International Journal of Solids and Structures*, Vol. 82 (2016), pp. 1--8. - Xiaosun Wang and J. R. Barber, Numerical frictional algorithm with implementation of closed form analytical solutions,
*Computer Methods in Applied Mechanics and Engineering*, Vol. 300 (2016), pp. 643--656. - J. R. Ockendon and J. R. Barber, A model for thermoelastic contact oscillations,
*IMA Journal of Applied Mathematics*, Vol. 81 (2016), pp. 679-687. - H. Wang, W. Lu, J. R. Barber and M. D. Thouless, The roles of cohesive strength and toughness for crack growth in visco-elastic and creeping materials,
*Engineering Fracture Mechanics*, Vol. 160 (2016), pp. 226--237. - M. Ciavarella, J.A. Greenwood and J.R. Barber, Effect of Tabor parameter on hysteresis losses during adhesive contact,
*Journal of the Mechanics and Physics of Solids*, Vol. 98 (2017), pp. 236--244. - A. Klarbring, J. R. Barber, A. Spagnoli and M. Terzano, Shakedown of discrete systems involving plasticity and friction,
*European Journal of Mechanics / A Solids*, Vol. 64 (2017) pp. 160--164. - J. Joe, M. Scaraggi and J. R. Barber, Effect of fine-scale roughness on the tractions between contacting bodies,
*Tribology International*, Vol. 111 (2017), pp. 52--56. - D. A. Hills, D. Nowell and J. R. Barber, K. L. Johnson and contact mechanics,
*Journal of Mechanical Engineering Science*, Vol. 231 (2017) (13) pp. 2451-2458. - Huihui Hong, Liang Han, N. C. Perkins, Chuan Hu and J. R. Barber, Nonlinear membrane stiffness model of a tennis racquet string bed,
*Journal of Sports Engineering and Technology*, - R. M. N. Fleury, D. A. Hills, R. Ramesh and J. R. Barber, Incomplete contacts in partial slip subject to varying normal and shear loading, and their representation by asymptotes,
*Journal of the Mechanics and Physics of Solids*, Vol. 99 (2017), pp. 178--191. - R. Ramesh, J. R. Barber and D. A. Hills, Plane incomplete contact problems subject to bulk stress with a
varying normal load,
*International Journal of Mechanical Science*, Vol. 122 (2017), pp. 228--234. - A. Spagnoli, M. Terzano, J. R. Barber and A. Klarbring, Non-linear programming in shakedown analysis with plasticity and friction,
*Journal of the Mechanics and Physics of Solids*, Vol. 104 (2017), pp. 71--83.

- J.R. Barber, Thermoelastic contact problems
**in**A.I.de Pater and J.J. Kalker,**eds.**, The mechanics of the contact between deformable bodies, Delft Univ. Press, (1975), pp. 177-190. - A. Azarkhin and J.R. Barber, Stability of a long cylindrical
shell with partial contact at the end face,
**in**A. P. S. Selvadurai and G. Voyiadjis,**eds.**, Mechanics of Materials Interfaces, Elsevier, Amsterdam, (1986), pp. 143--154. - J.R. Barber, R.A. Volz, R. Desai, R. Rubenfeld, B. Schipper, and J. Wolter, Automatic two-fingered grip selection, Proc. IEEE International Conference on Robotics and Automation, San Francisco, CA, (1986).
- J.R. Barber, Thermal effects in elastic contact,
**in**G.M.L.Gladwell, H. Ghonem, J. Kalousek,**eds.**, Contact mechanics and wear of rail/wheel systems II, University of Waterloo Press (1987), pp. 41--57. - J.R. Barber and M. Comninou, Thermoelastic effects in fracture, in Y.D.Bui and Q.S. Nguyen, eds., Thermomechanical couplings in solids, Elsevier, Lausanne, (1987), pp. 95--103.
- J.R. Barber, Stability of thermoelastic contact, Institution of Mechanical Engineers, International Conference on Tribology, London (1987), pp. 981-986.
- J.R.Barber, F.Ben Ammar and H.G.Georgiadis, Conductive heat exchange between bodies which are in contact for a very short period of time, Collected papers in Heat Transfer, ASME (1989), pp. 101--106.
- Nai-Yi Li and J.R.Barber, Residual stresses in castings with axisymmetric solidification, Transport Phenomena in Manufacturing, ASME (1989), pp. 27--34.
- J.R.Barber, Is modelling in tribology a useful activity?,
**in**Tribological modeling for mechanical designers, ASTM STP 1105, K.C.Ludema, R.G.Bayer, P.J.Blau and W.Littman,**eds.**, ASTM, Philadelphia, (1991), pp. 165--172. - F.Ben Ammar, M.Kaviany and J.R.Barber, Heat transfer during impact, Proc. Joint JSMA/ASME Heat Transfer Conference, Reno NV, March 1991, Vol. 4, pp. 481--492.
- N-Y. Li, L.G.Hector, Jr. and J.R.Barber, Theories of growth instability during soldification of metals: Part II, Stress function approach, Int. Conf Transport phenomena in processing, Hawaii, (1992).
- H.G.Georgiadis and J.R.Barber, On the super-Rayleigh/subseismic elastodynamic indentation problem, Proc. 3rd. Greek Conference on Mechanics, Athens, June 1992.
- Faruk Yigit and J.R.Barber, Effect of thermal capacity on the development of sinusoidal perturbations during the unidirectional solidification of pure metals, ASME Winter Annual Meeting, 1992, Anaheim, CA.
- J.R.Barber, Instability of unidirectional solidification due to pressure-dependent thermal contact resistance at the mould/casting interface, Contact Mechanics International Symposium, Lausanne, Switzerland, October 1992, pp. 71--89.
- C-K. Fang, E.Kannatey-Asibu Jr., and J.R.Barber, Crack-tip equation of motion due to non-uniform residual stresses in a weldment, Proceedings of the First S. M. Wu Symposium on Manufacturing Science, Northwestern University, Evanston, Il., May 27-28, 1994, pp. 261--268.
- Kwangjin Lee and J.R.Barber, The effect of intermittent contact on the thermoelastic instability of automotive brake systems, ASME Applied Mechanics and Materials Summer Meeting, UCLA, June 1995.
- Yong Hoon Jang and J.R.Barber, Transient thermoelastic contact problems for an elastic foundation, Third Asian Pacific Conference on Computational Mechanics (APCOM '96), Seoul, S.Korea, September 1996.
- Shuqin Du, P.Zagrodzki, J.R.Barber and G.M.Hulbert, Thermoelastic instabilities in brakes and clutches, Thermal Stresses '97, Rochester, NY, June 1997, pp.393--396.
- J.R.Barber, Thermoelastic instabilities in brakes and clutches, XXVI National Conference of the Italian Association for Stress Analysis (AIAS '97), Catania, Sicily, September 1997.
- J.R.Barber, Thermoelasticity and contact, Thermal Stresses '99, Cracow, Poland, (1999).
- P.Zagrodzki, K.B.Lam, E.Al-Bahkali and J.R.Barber, Simulation of a sliding system with frictionally-excited thermoelastic instability, Thermal Stresses '99, Cracow, Poland, (1999).
- Elizabeth T. Smith, William W.Schultz, James R. Barber and Elijah Kannatey-Asibu, Jr., Modeling laser weld pool oscillations subject to various edge constraints. Proc. 3rd ASME/JSME Joint Fluids Engineering Conference, San Francisco, CA, July 1999.
- Sejoong Oh, Karl Grosh and James R. Barber, Dynamic stability analysis of spur gears in a steady state, Proc. DETC'99, ASME, Nashville, TN, November 1999.
- Abdullah Al-Shabibi and J.R.Barber, Transient solution of
2-D TEI problem using reduced order models,
**in***Transmission and Driveline System Symposium 2001*(SP-1598), SAE. - J.R.Barber, Bounds on the thermal and electrical resistance between contacting elastic rough bodies, Thermal Stresses 2003, VPI, Blacksburg, VA, (2003).
- E.A.Al-Bahkali and J.R.Barber, A steady state solution for a sliding system with frictionally excited thermoelastic instability, Thermal Stresses 2003, VPI, Blacksburg, VA, (2003).
- Jiayin Li and J.R.Barber, Transient solution of the inhomogeneous thermoelastic contact problem using fast speed expansion, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
- J.R.Barber, M.Ciavarella and L.Afferante, Influence of thermal contact resistance on frictionally-excited thermoelastic instability (TEI), Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
- J.R.Barber and P.Hild, Non-uniqueness, eigenvalue solutions and wedged configurations involving Coulomb friction, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.
- M.Ciavarella, C.Murolo, W.Manners and J.R.Barber, Persson's theory of elastic contact of rough surfaces applied to random profiles with a dominant wavelength, Proc. ASME/STLE Int. Joint Tribology Conference, Long Beach, CA, October 2004.

- Yun-Bo Yi and J.R.Barber,
*HotSpotter*, A windows-based software package for estimating the susceptibility of brake and clutch systems to thermoelastic instability.