Books and Book Chapters – A.G. Ulsoy

Books

á            Automotive Control Systems, A.G. Ulsoy, H. Peng and M. ‚akmakcõ, Cambridge University Press, 2012 (in press).

á            Time Delay Systems: Analysis and Control Using the Lambert W Function, S. Yi, P.W. Nelson, A.G. Ulsoy, World Scientific, 2010.

á            Microcomputer Applications in Manufacturing, A. G. Ulsoy and W. R. DeVries, John Wiley and Sons, 1989.

á            Solutions for Microcomputer Applications in Manufacturing, A.G. Ulsoy and W.R. DeVries, John Wiley and Sons, 1989.

á            Sensors and Controls for Manufacturing, E. Kannatey-Asibu, Jr., A. G. Ulsoy, and R. Komanduri (eds.), ASME Publications, Nov. 1985.

 

Book Chapters

á             "Control of Machine Tools and Machining Processes," J.S. Dhupia and A.G. Ulsoy, Chapter in The Control Handbook, W.S. Levine (ed.), 2nd Edition, 2010. 

á            "Arch-Type Reconfigurable Machine Tool," J.S. Dhupia, A.G. Ulsoy, and Y. Koren, Chapter 9 in Smart Devices and Machines for Advanced Manufacturing, L. Wang and J. Xi (eds.), Springer-Verlag, 2008, pp 219-238.

á            "Monitoring and Control of Machining," A.G. Ulsoy, Chapter 1 in Condition Monitoring and Control for Intelligent Manufacturing, L. Wang and R.X. Gao (eds.), Springer-Verlag, 2006, pp 1-32.

á            "Reconfigurable Manufacturing Systems," Y. Koren, U. Heisel, F. Jovane, T. Moriwaki, G. Pritchow, A.G. Ulsoy and H. VanBrussel, Chapter 19 in Manufacturing Technologies for Machines of the Future, A. Daschchenko (ed.), Springer-Verlag, 2003, pp 627-665.

á            "Section I - Manufacturing," edited by A.G. Ulsoy, in the Mechanical Systems Design Handbook, O. Nwokah and Y. Hurmuzlu (eds.), CRC Press, Boca Raton, 2002, FL, pp 1-120.

á            "Monitoring and Control of Machining Operations," R.G. Landers, A.G. Ulsoy, and R. Furness, in the Mechanical Systems Design Handbook, O. Nwokah and Y. Hurmuzlu (eds.), CRC Press, Boca Raton, FL, 2002, pp 85-104.

á            "Manufacturing Systems and Their Design Principles," M.G. Mehrabi, A.G. Ulsoy, and Y. Koren, in the Mechanical Systems Design Handbook, O. Nwokah and Y. Hurmuzlu (eds.), CRC Press, Boca Raton, FL, 2002, pp 1-10.

á            "Dynamic Modeling and Control of Machining Processes," A.G. Ulsoy, Chap. 2 in Nonlinear Dynamics of Material Processing and Manufacturing, F.C. Moon (ed.), Wiley, NY, 1998, pp 33-55.

á            "Tooling Structure: Interface between Cutting Edge and Machine Tool," E.I. Rivin et al (A.G. Ulsoy, contributor), CIRP Annals, Keynote Paper, Vol. 49, No. 2, 2000, pp 591-634.

á            "Adaptive Control in Machining," Y. Koren and A.G. Ulsoy, in the Metals Handbook: Machining, J.R. Davis (ed.), Volume 16, 9th Edition, ASM Int., Metals Park, Ohio, 1989, pp 618-626.

 Last updated on 18 January 2012 by A. Galip Ulsoy (ulsoy@umich.edu)