1GHz Via Eden Processor w/ Integrated Graphics Accelerator
512MB DDR333 PC2700 RAM
120GB HDD
7 USB 2.0 Ports (3 onboard, 4 on external hub)
2 Firewire IEEE1394 Ports
1 DB9 Serial Port
1 Serial Port Header
2 Serial PS2 Ports
1 RJ45 Ethernet Port
5.1 Audio Output Capability (sacrifices microphone and line-in)
SPDIF Digital Out
DVD/CD-RW Drive
GPS Receiver
Hardware assisted MPEG2 decoding
XM Satellite Radio Receiver
Bluetooth
WiFi
These specifications were obtained using the following parts. You can download a parts list by clicking here. Total cost for parts was about $900.
-VIA EPIA M10000 Mini-ITX motherboard with integrated
graphics and CPU:
-512MB DDR PC2700 RAM (pictured installed in motherboard above)
-M1-ATX Power Supply:
-Xenarc 700TSV 7" LCD Touchscreen Display:
-120GB Hard Disk Drive
-Panasonic CW-8123-B Slot Loading DVD/CD-RW Drive:
-4 Port USB 2.0 Mini Hub
-Slim USB 2.0 Enclosure (to convert the DVD drive into an external USB 2.0 device)
-Rikaline GPS-6010 USB GPS Receiver
-D-Link DBT-120 USB Bluetooth Adaptor
-D-Link DWL-122 USB Wireless 802.11b Adaptor
-Terk XMD-1000 XMDirect Module:
-XMD-1000 Serial PC Adaptor Cable
-A couple RCA to stereo miniplug adaptors
Other Materials:
-Electrical Wiring
-Heat Shrink Wrap
-Solder
-Bondo Automobile Body Filler
-Sand Paper
-Spray Paint matching the dashboard
Proceed to fabrication.