SELECTED PUBLICATIONS

  1. Li, J., Jin, J. and Shi, J., “Causation-Based T2 Decomposition for Multivariate Process Monitoring and Diagnosis," Accepted by Journal of Quality Technology.
  2. Jin, J., Guo, H., and Zhou, S. (2006), “Statistical Process Control Based Supervisory Generalized Predictive Control of Thin Film Deposition Processes," Journal of Manufacturing Science and Engineering, Vol.128, No.1, pp.315-325.
  3. Chen, Y. and Jin, J. (2006), “Quality-Oriented-Maintenance for Multiple Interactive Tooling Components in Discrete Manufacturing Processes," IEEE Transactions on Reliability, Vol.55, No.1, pp.123-134.
  4. Guo, H. and Jin, J. (2006), “Travel Time Estimation Using Correlation Analysis of Single Loop Detector Data," Accepted by Transportation Research Record A.
  5. Chen, Y., Ding, Y., Jin, J., and Ceglarek, D. (2006), “Integration of Process-Oriented Tolerancing and Maintenance Planning In Design of Multi-station Manufacturing Processes ," IEEE Transactions on Automation Science and Engineering,  Vol.3, No.3.
  6. Chen, Y. and Jin, J. (2005), “Quality-Reliability Chain Modeling for System-Reliability Analysis of Complex Manufacturing Processes," IEEE Transactions on Reliability, Vol.54, No.3, pp.475-488.
  7. Ding, Y., Jin, J., Ceglarek, D., and Shi, J. (2005), “Process-Oriented Tolerancing for Multistation Assembly  Systems,” IIE Transactions on Quality and Reliability, Vol. 37(6), pp. 493-508.
  8. Zhou, S., and Jin, J. (2005), “Automatic Feature Selection for Unsupervised Clustering of Cycle-based Signals in Manufacturing Processes ,” IIE Transactions on Quality and Reliability, Vol. 37, pp. 569-584.
  9. Zhou, S., Jin, N., and Jin, J. (2005), “Cycle-based Signal Monitoring Using A Directionally Variant Control Chart System,” IIE Transactions on Quality and Reliability, Vol. 37, pp. 971-982.
  10. Jin, J. and Shi, J. (2005) “Press Tonnage Signal Decomposition and Validation for Transfer or Progressive Die Processes,” ASME Transactions, Journal of Manufacturing Science and Engineering Vol.127, pp.231-235.
  11. Ceglarek, D. and Jin, J. (2004), “Modeling and Analysis for Complex Production Systems. Position Statement,” International Journal of Flexible Manufacturing Systems, Vol.16, No.1, pp. 5-9.
  12. Jin, J. (2004) “Individual Station Monitoring Using Press Tonnage Sensors for Multiple Operation Stamping Processes,” ASME Transactions, Journal of Manufacturing Science and Engineering, Vol 126., No.1, pp. 83-90.
  13. Jin, J., and Ding, Y. (2004), “Online Automatic Process Control Using Observable Noise Factors for Discrete-part Manufacturing,” IIE Transactions on Quality and Reliability, Vol. 36, No. 9, pp. 899-911.
  14. Chen, Y., Jin, J., and Shi, J. (2004), “Integration of Dimensional Quality and Locator Reliability in Design and Evaluation of Multi-station Body-In-White Assembly Processes,” IIE Transactions on Quality and Reliability, Vol. 36, No. 9, pp. 826-839.
  15. Jin, J. and Guo, H. (2003), “ANOVA Methods for Variance Component Decomposition and Diagnosis in Batch Manufacturing Processes,” The International Journal of Flexible Manufacturing Systems, Vol. 15, PP. 167-186.
  16. Chen, Y. and Jin, J. (2003), “Cost-Variability-Sensitive Preventive Maintenance Considering Management Risk,” IIE Transactions on Quality and Reliability, Vol. 35, pp. 1091-1101.
  17. Ding, Y., Kim, P., Ceglarek, D., and Jin, J. (2003), “Optimal Sensor Distribution for Variation Diagnosis in Multistation Assembly Processes,” IEEE Transactions on Robotics and Automation, Vol. 19, No.4, pp. 543-556.
  18. Jin, J. and Chen, Y. (2001), “Quality and Reliability Information Integration for Design Evaluation of Fixture System Reliability,” Quality and Reliability Engineering International, Vol. 17, pp. 355-372.
  19. Jin, J. and Shi, J. (2001), “Automatic Feature Extraction of Waveform Signals for In-Process Diagnostic Performance Improvement,” Journal of Intelligent Manufacturing, Vol. 12, No. 3, pp. 257-268.
  20. Jin, J. and Shi, J. (2000), “Diagnostic Feature Extraction from Stamping Tonnage Signals Based on Design of Experiments,” ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 122, No. 2, pp.360-369.
  21. Jin, J. and Shi, J. (1999), “State-Space Modeling of Sheet Metal Assembly for Dimensional Control,” ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 756-762.
  22. Jin, J. and Shi, J. (1999), “Feature-Preserving Data Compression of Stamping Tonnage Information Using Wavelets,” Technometrics, Vol. 41, No. 4, pp. 327-339.
  23. Ganesan, R., Jin, J., and Sankar, T. S. (1995), “A Classifier Neural Network for Rotor Dynamic Systems,” Mechanical Systems and Signal Processing, Vol. 9, No. 4, pp. 397-414.
  24. Jin, J., Zhong, B. and Huang, R. (1993), “Approximation of Nonlinear Functions Using Functional Neural Networks,” Journal of Southeast University, China, Vol. 23, No. 11, pp. 74-79.
  25. Jin, J. (1991), “Continuous Function Approximation Using Block-Pulse Functions,” Journal of Southeast University, China, Vol. 21, No. 2, pp. 22-30.
  26. Jin, J., Yang, X., and Tong, B. (1989), “Automatic Detection of Abnormal Data in Dynamic Measurement Systems Using Fuzzy Logic,” Journal of Southeast University, China, Vol. 5, No. 2, pp. 49-45.
  27. Yang, X., Jin, J., and Tong, B. (1988), “Bispectrum Analysis of Nonlinear Modulation Functions,” Journal of Southeast University, China, Vol. 18, No. 2, pp. 1-8.

Audience-Based Site-Wide Navigation:

back to top