2017

Zekkos, D., Clark, M., Whitworth, M., Greenwood, W., West, J., Robak, K., Li, G., Chamlagain, D., Manousakis, J., Quackenbush, P., Medwedeff, W., and Lynch, J. P. (2017). “Observations of Landslides Caused by the April 2015 Gorkha Earthquake in Nepal Based on Land, UAV and Satellite Reconnaissance,” Earthquake Spectra, EERI, accepted and in press.

Johnson, N., Lynch, J. P., and Collette, M. (2017). “Response and Long-Term Fatigue Assessment of High Speed Aluminium Hulls using Short-Term Wireless Hull Monitoring,” Structure and Infrastructure Engineering, Taylor & Francis, accepted and in press.

Pour-Ghaz, M., Wilson, J., Spragg, R., Nadukuru, S. S., Kim, J., O’Connor, S. M., Byrne, E. M., Sigurdardottir, D. H., Yao, Y., Michalowski, R. L., Lynch, J. P., Green, R. A., Bradshaw, A. S., Glisic, B., and Weiss, W. J. (2017). “Performance and Damage Evolution of Plain and Fiber Reinforced Segmental Concrete Pipelines subjected to Transverse Permanent Ground Displacement,” Structure and Infrastructure Engineering, Taylor & Francis, accepted and in press.

Lo, C., Lynch, J. P., and Liu, M. (2017). “Design and Optimisation of a Distributive Model-Based Sensor Fault Detection Method for Automated In-Network Execution in a Wireless Sensor Network,” International Journal of Sustainable Materials and Structural Systems, Inderscience Publishers, accepted and in press.

Zhang, Y., Kurata, M., and Lynch, J. P. (2017). “Long-Term Modal Analysis of Wireless Structural Monitoring Data from a Suspension Bridge under Varying Environmental and Operational Conditions: System Design and Automated Modal Analysis,” Journal of Engineering Mechanics, ASCE, 143(4): 04016124.

O’Connor, S., Zhang, Y., Lynch, J. P., Ettouney, M., and Jansson, P. O. (2017). “Long-Term Performance Assessment of the Telegraph Road Bridge using a Permanent Wireless Monitoring System and Automated Statistical Process Control Analytics,” Structure and Infrastructure Engineering, Taylor & Francis, 13(5): 604-624.

2016

Jeong, S., Zhang, Y., O’Connor, S., Lynch, J. P., Sohn, H., and Law, K. H. (2016). “A NoSQL Data Management Infrastructure for Bridge Monitoring,” Smart Structures and Systems, TechnoPress, 17(4): 669-690.

Häckell, M. W., Rolfes, R., Kane, M. B., and Lynch, J. P. (2016). “Three-Tier Modular Structural Health Monitoring Framework using Environmental and Operational Condition Clustering for Data Normalization: Validation on an Operational Wind Turbine System,” Proceedings of the IEEE, IEEE, 104(8): 1632 - 1646.

2015

Zhang, Y., O’Connor, S. M., van der Linden, G., Prakash, A., and Lynch, J. P. (2015). “SenStore: A Scalable Cyberinfrastructure Platform for Implementation of Data-to-Decision Frameworks for Infrastructure Health Management,” Journal of Computing in Civil Engineering, ASCE, 30(5): 04016012.

Lo, C., Lynch, J. P., and Liu, M. Y. (2015). “Distributed Model-based Nonlinear Sensor Fault Diagnosis in Wireless Sensor Networks,” Mechanical Systems and Signal Processing, Elsevier, 66-67: 470-484.

2014

Devki, D., Miller, M., Lynch, J. P., and Li, V. (2014). “Development of Thermally Adaptive Engineered Cementitious Composite for Passive Heat Storage” Construction and Building Materials, Elsevier, 67(C): 366-372. 

Peckens, C., Lynch, J. P., and Heo, G. (2014). “Resource Efficient Wireless Sensor Network Architecture based on Bio-mimicry of the Mammalian Auditory System,” Journal of Intelligent Material Systems and Structures, Sage, 26(1) 79–100.

McCullagh, J. J., Peterson, R. L., Galchev, T. V., Gordenker, R., Zhang, Y., Lynch, J. P., and Najafi, K. (2014). “Long-term Testing of a Vibration Harvesting System for the Structural Health Monitoring of Bridges,” Sensors and Actuators A: Physical, Elsevier, 217(2014): 139-150.

Mosavi, A., Sedarat, H., O’Connor, S. M., Emami-Naeini, A., Lynch, J. P. (2014). “Calibrating a High-Fidelity Finite Element Model of a Highway Bridge using a Multi-Variable Sensitivity-based Optimization Approach,” Structure and Infrastructure Engineering, Taylor & Francis, 10(5): 627-642.

O’Connor, S., Lynch, J. P., and Gilbert, A. (2014). “Compressed Sensing Embedded in an Operational Wireless Sensor Network to Achieve Energy Efficiency in Long-term Monitoring Applications,” Smart Materials and Structures, IOP, 23(8): 085014.

Ranade, R., Zhang, J., Lynch, J. P., and Li, V. C. (2014). “Influence of Micro-Cracking on the Composite Resistivity of Engineered Cementitious Composites,” Cement and Concrete Research, Elsevier, 58(4):1-12.

2013

Peckens, C., and Lynch, J. P. (2013). “Utilizing the Cochlea as a Bio-inspired Compressive Sensing Technique,” Smart Materials and Structures, IOP, 22(10): 105027.

Kurata, M., Kim, J., Lynch, J. P., van der Linden, G. W., Seddat, H., Thometz, E., Hipley, P., Sheng, L. H (2013). “Internet-enabled Wireless Structural Monitoring Systems: Development and Permanent Deployment at the New Carquinez Suspension Bridge,” Journal of Structural Engineering, ASCE, 139(10): 1688-1702.

Zimmerman, A. T., Lynch, J. P., and Ferrese, F. (2013). “Market-Based Resource Allocation for Distributed Data Processing in Wireless Sensor Networks,” Transactions on Embedded Computing Systems, ACM, 12(3): 84:1-28.

2012

Lo, C., Lynch, J. P., Liu, M. Y. (2012). “Distributed Reference-free Fault Detection Method for Autonomous Wireless Sensor Networks,” IEEE Sensors Journal, IEEE, 13(5): 2009-2019.

Kim, J., and Lynch, J. P. (2012). “Subspace System Identification of Support Excited Structures - Part I: Theory and Black-box System Identification,” Earthquake Engineering and Structural Dynamics, Wiley, 41(15): 2235-2251.

Kim, J., and Lynch, J. P. (2012). “Subspace System Identification of Support Excited Structures - Part II: Grey-box Interpretations and Damage Detection,” Earthquake Engineering and Structural Dynamics, Wiley, 41(15): 2253-2271.

Kim, J., and Lynch, J. P. (2012). “Autonomous Decentralized System Identification by Markov Parameter Estimation using Distributed Smart Wireless Sensor Networks,” Journal of Engineering Mechanics, ASCE, 138(5): 478-490.

Kim, J., Nadukuru, S. S., Pour-Ghaz, M., Lynch, J. P., Michalowski, R. L., Bradshaw, A. S., Green, R. A., and Weiss, W. J. (2012). “Damage Detection and Health Monitoring Of Buried Concrete Pipelines – A Large-Scale Experiment,” Journal of Pipeline Systems Engineering and Practice, ASCE, 3(1): 8-16.

Swartz, R. A., Zimmerman, A. T., Lynch, J. P., Rosario, J., Brady, T., Salvino, L., and Law, K. H. (2012). “Hybrid Wireless Hull Monitoring System for Naval Combat Vessels,” Structure and Infrastructure Engineering, Taylor & Francis Group, 8(7): 621-638.

Kim, J., and Lynch, J. P. (2012). “Experimental Analysis of Vehicle-Bridge Interaction using a Wireless Monitoring System and a Two-Stage System Identification Technique,” Mechanical Systems and Signal Processing, Elsevier, 28(2012): 3-19.

2011

Hsu, T. Y., Huang, S. K., Lu, K. C., Loh, C. H., Wang, Y., and Lynch, J. P. (2011). “On-line Structural Damage Localization and Quantification Using Wireless Sensors,” Smart Materials and Structures, IOP, 20(2011): 105025.

Pour-Ghaz, M., Kim, J., Nadukuru, S. S., O’Connor, S., Michalowski, R. L., Bradshaw, A., Green, R. A., Lynch, J. P., Poursaee, A., and Weiss, W. J. (2011). “Using Electrical, Magnetic and Acoustic Sensors to Detect Damage in Segmental Concrete Pipes Subjected to Permanent Ground Displacement,” Cement and Concrete Composites, Elsevier, 33(7): 749-762.

Pyo, S., Loh, K. J., Hou, T. C., Jarva, E., and Lynch, J. P. (2011). “A Wireless Impedance Analyzer for Automated Tomographic Mapping of a Nanoengineered Sensing Skin,” Smart Structures and Systems, TechnoPress, 8(1): 139-155. 

Kim, J., Lynch, J. P., Lee, J. J., and Lee, C. G. (2011). “Truck-based Mobile Wireless Sensor Networks for Experimental Observation of Vehicle-Bridge Interaction,” Smart Materials and Structures, IOP, 20(2011): 065009.

2010

Ni, Y. Q., Li, B., Lam, K. H., Zhu, D. P., Wang, Y., Lynch, J. P., and Law, K. H. (2010). “In-construction Vibration Monitoring of a Supertall Structure using a Long-range Wireless Sensing System,” Smart Structures and Systems, TechnoPress, 7(2): 83-102.

Zimmerman, A. T., and Lynch, J. P. (2010). “Market-Based Frequency Domain Decomposition for Automated Mode Shape Estimation in Wireless Sensor Networks,” Journal of Structural Control and Health Monitoring, Wiley, 17(7): 808–824.

Park, J. H., Kim, J. T., Hong, D. S., Mascarenas, D., and Lynch, J. P. (2010). “Autonomous Smart Sensor Nodes for Global and Local Damage Detection of Prestressed Concrete Bridges based on Accelerations and Impedance Measurements,” Smart Structures and Systems, TechnoPress, 6(5-6): 711-730.

Kim, J., Swartz, R. A., Lynch, J. P., Lee, J. J., and Lee, C. G. (2010). “Rapid-to-Deploy Reconfigurable Wireless Structural Monitoring Systems using Extended-Range Wireless Sensors,” Smart Structures and Systems, TechnoPress, 6(5-6):505-524.

Swartz, R. A., Lynch, J. P., Zerbst, S., Sweetman, B., and Rolfes, R. (2010). “Structural Monitoring of Wind Turbines using Wireless Sensor Networks,” Smart Structures and Systems, TechnoPress, 6(3): 183-196.

Cho, S., Lynch, J. P., Lee, J. J., and Yun, C. B. (2010). “Development of an Automated Wireless Tension Force Estimation System for Cable-stayed Bridges,” Journal of Intelligent Material Systems and Structures, Sage Publications, 21(3): 361-376.

2009

Zimmerman, A. T. and Lynch, J. P. (2009). “A Parallel Simulated Annealing Architecture for Model Updating in Wireless Sensor Networks,” IEEE Sensors Journal, IEEE, 9(11): 1503-1510.

Hou, T. C. and Lynch, J. P. (2009). “Electrical Impedance Tomographic Methods for Sensing Strain Fields and Crack Damage in Cementitious Structures,” Journal of Intelligent Material Systems and Structures, Sage Publications, 20(11): 1363-1379.

Wang, Y., Lynch, J. P. and Law, K. H. (2009). “Decentralized H Controller Design for Large-scale Civil Structures,” Earthquake Engineering and Structural Dynamics, John Wiley & Sons, 38(3): 377–401.

Swartz, R. A. and Lynch J. P. (2009). “Strategic Network Utilization in a Wireless Structural Control System for Seismically Excited Structures,” Journal of Structural Engineering, ASCE, 135(5): 597-608.

Loh, K. J., Hou, T. C., Lynch, J. P. and Kotov, N. A. (2009). “Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage Identification,” Journal of Nondestructuctive Evaluation, Springer, 28(1): 9-25.

2008

Loh, K. J., Lynch, J. P. and Kotov, N. A. (2008). “Passive Wireless Sensing using SWNT-based Multifunctional Thin Film Patches,” International Journal for Applied Electromagnetics and Mechanics, IOS Press, 28(1-2): 87-94.

Cho, S., Yun, C. B., Lynch, J. P., Zimmerman, A. T., Spencer Jr., B. F. and Nagayama, T. (2008). “Smart Wireless Sensor Technology for Structural Health Monitoring of Civil Structures,” International Journal of Steel Structures, KSSC, 8(4): 267-275.

Lu, K. C., Loh, C. H., Yang, Y. S., Lynch, J. P. and Law, K. H. (2008). “Real-Time Structural Damage Detection using Wireless Sensing and Monitoring System,” Smart Structures and Systems, TechnoPress, 4(6): 759-778.

Loh, K. J., Lynch, J. P. and Kotov, N. A. (2008). “Inductively Coupled Nanocomposite Wireless Strain and pH Sensors,” Smart Structures and Systems, TechnoPress, 4(5): 531-548.

Loh, C. H., Lynch, J. P., Lu, K. C., Wang, Y. and Lin, P. Y. (2008).  “Output-only Modal Identification of a Cable-stayed Bridge using Wireless Monitoring Systems,” Engineering Structures, Elsevier, 30(7): 1820-1830.

Lynch, J. P., Wang, Y., Swartz, R. A., Lu, K. C. and Loh, C. H. (2008). “Implementation of a Closed-Loop Structural Control System using Wireless Sensor Networks,“ Journal of Structural Control and Health Monitoring, Wiley, 15(4): 518-539.

Loh, K. J., Lynch, J. P., Shim, B. S. and Kotov, N. (2008). “Tailoring Piezoresistive Sensitivity of Multilayer Carbon Nanotube Composite Strain Sensors,” Journal of Intelligent Material Systems and Structures, Sage Publications, 19(7): 747-764.

Pei, J.-S., Kapoor, C., Graves-Abe, T., Sugeng, Y. P. and Lynch, J. P. (2008). “An Experimental Investigation of the Data Delivery Performance of a Wireless Sensing Unit Designed for Structural Health Monitoring,” Journal of Structural Control and Health Monitoring, John Wiley & Sons, 15(4): 471-504.

Zimmerman, A. T., Shiraishi, M., Swartz, R. A. and Lynch, J. P. (2008). “Automated Modal Parameter Estimation by Parallel Processing within Wireless Monitoring Systems,” ASCE Journal of Infrastructure Systems, ASCE, 14(1): 102-113.

Nagarajaiah, S., Dyke, S., Lynch, J. P., Smyth, A., Agrawal, A., Symans, M., and Johnson, E. (2008). “Current Directions of Structural Health Monitoring and Control in USA,” Advances in Science and Technology, Trans Tech Publishing, 56: 277-286.

2007

Hou, T. C., Loh, K. J. and Lynch, J. P. (2007). “Spatial Conductivity Mapping of Carbon Nanotube Composite Thin Films by Electrical Impedance Tomography for Sensing Applications,” Nanotechnology, IOP, 18(31): 315501.

Loh, C. H., Lynch, J. P., Lu, K. C., Wang, Y., Yeh, T. H., Chang, C. M. and Lin, P. Y. (2007). “Experimental Verification of Wireless Sensing and Control System for Structural Control using MR-Dampers,“  Earthquake Engineering and Structural Dynamics, Wiley, 36(10):1303-1328.

Wang, Y., Swartz, R. A., Lynch, J. P., Law, K. H., Lu, K. C. and Loh, C. H. (2007). “Decentralized Civil Structural Control using Real-time Wireless Sensing and Embedded Computing,” Smart Structures and Systems, TechnoPress, 3(3):321-340.

Glaser, S. D., Li, H. Wang, M., Ou, J. and Lynch, J. P. (2007). “Sensor Technology Innovation for the Advancement of Structural Health Monitoring: A Strategic Program of US-China Research for the Next Decade,” Smart Structures and Systems, TechnoPress, 3(2):221-244.

Loh, K. J., Kim, J., Lynch, J. P., Kam, N. W. S. and Kotov, N. (2007). “Multifunctional Layer-by-Layer Carbon Nanotube-Polyelectrolyte Thin Films for Strain and Corrosion Sensing,” Smart Materials and Structures, IOP, 16(2):429-438.

Lynch, J. P. (2007). “An Overview of Wireless Structural Health Monitoring for Civil Structures,” Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, The Royal Society, London, 365(1851): 345-372. 

Wang, Y., Lynch, J. P. and Law, K. H. (2007). “A Wireless Structural Health Monitoring System with Multithreaded Sensing Devices: Design and Validation,” Structure and Infrastructure Engineering, Taylor & Francis Group, United Kingdom, 3(2): 103-120.

2006

Lynch, J. P., Wang, Y., Loh, K. J., Yi, J. H. and Yun, C. B. (2006). “Performance Monitoring of the Geumdang Bridge using a Dense Network of High-Resolution Wireless Sensors,” Smart Materials and Structures, IOP, 15(6): 1561-1575.

Lynch, J. P. and Loh, K. J. (2006). “A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,” Shock and Vibration Digest, Sage Publications, 38(2): 91-128.

2005

Lynch, J. P. (2005). “Design of a Wireless Active Sensing Unit for Localized Structural Health Monitoring,” Journal of Structural Control and Health Monitoring, Wiley & Sons, 12(3-4): 405-423. 

Lei, Y., Kiremidjian, A. S., Nair, K. K., Lynch, J. P. and Law, K. H. (2005). “Algorithms for Time Synchronization of Wireless Structural Monitoring Sensors,” Earthquake Engineering and Structural Dynamics, John Wiley & Sons, 34(6): 555-573.

2004

Lynch, J. P. and Law, K. H. (2004). “Decentralized Energy Market-Based Structural Control,” Structural Engineering and Mechanics, Techno Press, 17(3-4): 557-572.

Lynch, J. P., Law, K. H., Kiremidjian, A. S., Carryer, E., Farrar, C., Sohn, H., Allen, D., Nadler, B. and Wait, J. (2004).  “Design and Performance Validation of a Wireless Sensing Unit for Structural Monitoring Applications,” Structural Engineering and Mechanics, Techno Press, 17(3-4): 393-408.

Lynch, J. P., Sundararajan, A., Law, K. H., Kiremidjian, A. S. and Carryer, E. (2004). "Embedding Damage Detection Algorithms in a Wireless Sensing Unit for Attainment of Operational Power Efficiency," Smart Materials and Structures, IOP, 13(4): 800-810.

2003

Lynch, J. P., Sundararajan, A., Law, K. H., Kiremidjian, A. S., Kenny, T. W. and Carryer, E. (2003). “Embedment of Structural Monitoring Algorithms in a Wireless Sensing Unit,” Structural Engineering and Mechanics, Techno Press, 15(3): 285-297.

Lynch, J. P., Partridge, A., Law, K. H., Kenny, T. W., Kiremidjian, A. S. and Carryer, E. (2003). “Design of a Piezoresistive MEMS-Based Accelerometer for Integration with a Wireless Sensing Unit for Structural Monitoring,” ASCE Journal of Aerospace Engineering, ASCE, 16(3): 108-114

2002

Lynch, J. P. and Law, K. H. (2002). “Market-Based Control of Linear Structural Systems,” Earthquake Engineering and Structural Dynamics, John Wiley & Sons, 31(10): 1855-1877.