|
Use a good pair of tin snips, or other cutters to cut out the shapes.
Use a piece of metal (as a straight edge - [the gold piece]), or a vise to help
bend the shapes. A straight edge seem's to work better than a vise. The 1/4"
piece of metal used as a counter weight does NOT have to be rivited in. I used
JBWeld and it was fast and easy. You do have to drill a hole for the rivet that
holds the triangled flap in place though.
|
 |
Assemble the "hopper" and rivit it together. 3 rivits do the job. Add epoxy if desired. |
