zenilib
0.5.3.0
|
#include "SDL_stdinc.h"
#include "SDL_pixels.h"
#include "SDL_rect.h"
#include "SDL_blendmode.h"
#include "SDL_rwops.h"
#include "begin_code.h"
#include "close_code.h"
Go to the source code of this file.
Classes | |
struct | SDL_Surface |
A collection of pixels used in software blitting. More... | |
Macros | |
#define | SDL_BlitScaled SDL_UpperBlitScaled |
#define | SDL_BlitSurface SDL_UpperBlit |
#define | SDL_LoadBMP(file) SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1) |
#define | SDL_MUSTLOCK(S) (((S)->flags & SDL_RLEACCEL) != 0) |
#define | SDL_SaveBMP(surface, file) SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1) |
Surface flags | |
These are the currently supported flags for the SDL_Surface. | |
#define | SDL_SWSURFACE 0 |
#define | SDL_PREALLOC 0x00000001 |
#define | SDL_RLEACCEL 0x00000002 |
#define | SDL_DONTFREE 0x00000004 |
Typedefs | |
typedef int(* | SDL_blit )(struct SDL_Surface *src, SDL_Rect *srcrect, struct SDL_Surface *dst, SDL_Rect *dstrect) |
The type of function used for surface blitting functions. More... | |
typedef struct SDL_Surface | SDL_Surface |
A collection of pixels used in software blitting. More... | |
Header file for SDL_Surface definition and management functions.
Definition in file SDL_surface.h.
#define SDL_BlitScaled SDL_UpperBlitScaled |
Definition at line 476 of file SDL_surface.h.
Referenced by SW_RenderCopy(), and SW_RenderCopyEx().
#define SDL_BlitSurface SDL_UpperBlit |
Performs a fast blit from the source surface to the destination surface.
This assumes that the source and destination rectangles are the same size. If either srcrect
or dstrect
are NULL, the entire surface (src
or dst
) is copied. The final blit rectangles are saved in srcrect
and dstrect
after all clipping is performed.
The blit function should not be called on a locked surface.
The blit semantics for surfaces with and without blending and colorkey are defined as follows:
RGBA->RGB: Source surface blend mode set to SDL_BLENDMODE_BLEND: alpha-blend (using the source alpha-channel and per-surface alpha) SDL_SRCCOLORKEY ignored. Source surface blend mode set to SDL_BLENDMODE_NONE: copy RGB. if SDL_SRCCOLORKEY set, only copy the pixels matching the RGB values of the source color key, ignoring alpha in the comparison. RGB->RGBA: Source surface blend mode set to SDL_BLENDMODE_BLEND: alpha-blend (using the source per-surface alpha) Source surface blend mode set to SDL_BLENDMODE_NONE: copy RGB, set destination alpha to source per-surface alpha value. both: if SDL_SRCCOLORKEY set, only copy the pixels matching the source color key. RGBA->RGBA: Source surface blend mode set to SDL_BLENDMODE_BLEND: alpha-blend (using the source alpha-channel and per-surface alpha) SDL_SRCCOLORKEY ignored. Source surface blend mode set to SDL_BLENDMODE_NONE: copy all of RGBA to the destination. if SDL_SRCCOLORKEY set, only copy the pixels matching the RGB values of the source color key, ignoring alpha in the comparison. RGB->RGB: Source surface blend mode set to SDL_BLENDMODE_BLEND: alpha-blend (using the source per-surface alpha) Source surface blend mode set to SDL_BLENDMODE_NONE: copy RGB. both: if SDL_SRCCOLORKEY set, only copy the pixels matching the source color key.
You should call SDL_BlitSurface() unless you know exactly how SDL blitting works internally and how to use the other blit functions.
Definition at line 447 of file SDL_surface.h.
Referenced by _rotateSurface(), SW_RenderCopy(), and SW_RenderCopyEx().
#define SDL_DONTFREE 0x00000004 |
Surface is referenced internally
Definition at line 55 of file SDL_surface.h.
Referenced by SDL_DestroyWindow(), SDL_FreeSurface(), SDL_GetWindowSurface(), and SDL_RecreateWindow().
#define SDL_LoadBMP | ( | file | ) | SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1) |
Load a surface from a file.
Convenience macro.
Definition at line 182 of file SDL_surface.h.
Referenced by main(), and SDLTest_LoadIcon().
#define SDL_MUSTLOCK | ( | S | ) | (((S)->flags & SDL_RLEACCEL) != 0) |
Evaluates to true if the surface needs to be locked before access.
Definition at line 61 of file SDL_surface.h.
Referenced by _rotateSurface(), SDL_CalculateShapeBitmap(), SDL_CalculateShapeTree(), SDL_CreateTextureFromSurface(), SDL_RLEAlphaBlit(), SDL_RLEBlit(), SDL_SoftBlit(), SDL_SoftStretch(), and SW_UpdateTexture().
#define SDL_PREALLOC 0x00000001 |
Surface uses preallocated memory
Definition at line 53 of file SDL_surface.h.
Referenced by RLEAlphaSurface(), RLEColorkeySurface(), SDL_CreateRGBSurfaceFrom(), SDL_CreateSurfaceOnStack(), SDL_FreeSurface(), and SDL_UnRLESurface().
#define SDL_RLEACCEL 0x00000002 |
Surface is RLE encoded
Definition at line 54 of file SDL_surface.h.
Referenced by _rotateSurface(), SDL_CalculateBlit(), SDL_ConvertSurface(), SDL_FreeSurface(), SDL_LockSurface(), SDL_MapSurface(), SDL_RLESurface(), SDL_SetColorKey(), SDL_UnlockSurface(), and SDL_UnRLESurface().
#define SDL_SaveBMP | ( | surface, | |
file | |||
) | SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1) |
Save a surface to a file.
Convenience macro.
Definition at line 199 of file SDL_surface.h.
Referenced by SDLTest_CompareSurfaces(), and SDLTest_ScreenShot().
#define SDL_SWSURFACE 0 |
Just here for compatibility
Definition at line 52 of file SDL_surface.h.
Referenced by _rotateSurface(), main(), SDLTest_DrawCharacter(), and SW_RenderCopyEx().
typedef int(* SDL_blit)(struct SDL_Surface *src, SDL_Rect *srcrect, struct SDL_Surface *dst, SDL_Rect *dstrect) |
The type of function used for surface blitting functions.
Definition at line 97 of file SDL_surface.h.
typedef struct SDL_Surface SDL_Surface |
A collection of pixels used in software blitting.
pixels
, which, if not NULL, contains the raw pixel data for the surface. DECLSPEC int SDLCALL SDL_ConvertPixels | ( | int | width, |
int | height, | ||
Uint32 | src_format, | ||
const void * | src, | ||
int | src_pitch, | ||
Uint32 | dst_format, | ||
void * | dst, | ||
int | dst_pitch | ||
) |
Copy a block of pixels of one format to another format.
Definition at line 984 of file SDL_surface.c.
References SDL_Rect::h, SDL_BYTESPERPIXEL, SDL_CreateSurfaceOnStack(), SDL_InvalidParamError, SDL_ISPIXELFORMAT_FOURCC, SDL_LowerBlit(), SDL_memcpy(), SDL_PIXELFORMAT_IYUV, SDL_PIXELFORMAT_UYVY, SDL_PIXELFORMAT_YUY2, SDL_PIXELFORMAT_YV12, SDL_PIXELFORMAT_YVYU, SDL_SetError(), SDL_Rect::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by SDL_UnlockTextureNative(), SDL_UpdateTextureNative(), and SW_RenderReadPixels().
DECLSPEC SDL_Surface* SDLCALL SDL_ConvertSurface | ( | SDL_Surface * | src, |
const SDL_PixelFormat * | fmt, | ||
Uint32 | flags | ||
) |
Creates a new surface of the specified format, and then copies and maps the given surface to it so the blit of the converted surface will be as fast as possible. If this function fails, it returns NULL.
The flags
parameter is passed to SDL_CreateRGBSurface() and has those semantics. You can also pass SDL_RLEACCEL in the flags parameter and SDL will try to RLE accelerate colorkey and alpha blits in the resulting surface.
Definition at line 804 of file SDL_surface.c.
References SDL_BlitInfo::a, SDL_Color::a, SDL_PixelFormat::Amask, SDL_BlitInfo::b, SDL_Color::b, SDL_PixelFormat::BitsPerPixel, SDL_PixelFormat::Bmask, SDL_Surface::clip_rect, SDL_BlitInfo::colorkey, SDL_Palette::colors, SDL_BlitInfo::flags, SDL_Surface::format, SDL_BlitInfo::g, SDL_Color::g, SDL_PixelFormat::Gmask, SDL_Rect::h, SDL_Surface::h, i, SDL_BlitMap::info, SDL_Surface::map, SDL_Palette::ncolors, NULL, SDL_PixelFormat::palette, SDL_BlitInfo::r, SDL_Color::r, SDL_PixelFormat::Rmask, SDL_BLENDMODE_BLEND, SDL_ConvertColorkeyToAlpha(), SDL_COPY_BLEND, SDL_COPY_COLORKEY, SDL_COPY_MODULATE_ALPHA, SDL_COPY_RLE_ALPHAKEY, SDL_COPY_RLE_COLORKEY, SDL_COPY_RLE_DESIRED, SDL_CreateRGBSurface(), SDL_FALSE, SDL_GetRGBA(), SDL_InvalidateMap(), SDL_LowerBlit(), SDL_MapRGBA(), SDL_memcmp(), SDL_memcpy(), SDL_RLEACCEL, SDL_SetClipRect(), SDL_SetColorKey(), SDL_SetError(), SDL_SetSurfaceBlendMode(), SDL_SetSurfaceRLE(), SDL_TRUE, SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by SDL_ConvertSurfaceFormat(), SDL_CreateTextureFromSurface(), and SDL_SaveBMP_RW().
DECLSPEC SDL_Surface* SDLCALL SDL_ConvertSurfaceFormat | ( | SDL_Surface * | src, |
Uint32 | pixel_format, | ||
Uint32 | flags | ||
) |
Definition at line 928 of file SDL_surface.c.
References NULL, SDL_AllocFormat(), SDL_ConvertSurface(), and SDL_FreeFormat().
Referenced by SDL_CreateColorCursor(), and SDL_SetWindowIcon().
DECLSPEC SDL_Surface* SDLCALL SDL_CreateRGBSurface | ( | Uint32 | flags, |
int | width, | ||
int | height, | ||
int | depth, | ||
Uint32 | Rmask, | ||
Uint32 | Gmask, | ||
Uint32 | Bmask, | ||
Uint32 | Amask | ||
) |
Allocate and free an RGB surface.
If the depth is 4 or 8 bits, an empty palette is allocated for the surface. If the depth is greater than 8 bits, the pixel format is set using the flags '[RGB]mask'.
If the function runs out of memory, it will return NULL.
flags | The flags are obsolete and should be set to 0. |
width | The width in pixels of the surface to create. |
height | The height in pixels of the surface to create. |
depth | The depth in bits of the surface to create. |
Rmask | The red mask of the surface to create. |
Gmask | The green mask of the surface to create. |
Bmask | The blue mask of the surface to create. |
Amask | The alpha mask of the surface to create. |
Definition at line 35 of file SDL_surface.c.
References SDL_Color::b, SDL_PixelFormat::BitsPerPixel, SDL_Palette::colors, SDL_Surface::format, SDL_PixelFormat::format, SDL_Color::g, SDL_Surface::h, SDL_Surface::map, SDL_Palette::ncolors, NULL, SDL_Surface::pitch, SDL_Surface::pixels, SDL_Color::r, SDL_Surface::refcount, SDL_AllocBlitMap(), SDL_AllocFormat(), SDL_AllocPalette(), SDL_BLENDMODE_BLEND, SDL_CalculatePitch(), SDL_calloc(), SDL_FreePalette(), SDL_FreeSurface(), SDL_ISPIXELFORMAT_INDEXED, SDL_malloc(), SDL_MasksToPixelFormatEnum(), SDL_memset(), SDL_OutOfMemory, SDL_PIXELFORMAT_UNKNOWN, SDL_SetClipRect(), SDL_SetError(), SDL_SetSurfaceBlendMode(), SDL_SetSurfacePalette(), and SDL_Surface::w.
Referenced by _rotateSurface(), SDL_ConvertSurface(), SDL_CreateCursor(), SDL_CreateRGBSurfaceFrom(), SDL_LoadBMP_RW(), SDL_SW_CopyYUVToRGB(), SDLTest_DrawCharacter(), SDLTest_ScreenShot(), SW_CreateTexture(), and SW_RenderCopyEx().
DECLSPEC SDL_Surface* SDLCALL SDL_CreateRGBSurfaceFrom | ( | void * | pixels, |
int | width, | ||
int | height, | ||
int | depth, | ||
int | pitch, | ||
Uint32 | Rmask, | ||
Uint32 | Gmask, | ||
Uint32 | Bmask, | ||
Uint32 | Amask | ||
) |
Definition at line 122 of file SDL_surface.c.
References SDL_Surface::flags, SDL_Surface::h, NULL, SDL_Surface::pitch, SDL_Surface::pixels, SDL_CreateRGBSurface(), SDL_PREALLOC, SDL_SetClipRect(), and SDL_Surface::w.
Referenced by Zeni::Window::alert_window_resized(), SDL_CreateWindowFramebuffer(), SDL_SW_CopyYUVToRGB(), SDLTest_ImageBlit(), SDLTest_ImageBlitAlpha(), SDLTest_ImageBlitBlend(), SDLTest_ImageBlitBlendAdd(), SDLTest_ImageBlitBlendAll(), SDLTest_ImageBlitBlendMod(), SDLTest_ImageBlitBlendNone(), SDLTest_ImageBlitColor(), SDLTest_ImageFace(), SDLTest_ImagePrimitives(), and SDLTest_ImagePrimitivesBlend().
Performs a fast fill of the given rectangle with color
.
If rect
is NULL, the whole surface will be filled with color
.
The color should be a pixel of the format used by the surface, and can be generated by the SDL_MapRGB() function.
Definition at line 332 of file SDL_fillrect.c.
References SDL_PixelFormat::BitsPerPixel, SDL_PixelFormat::BytesPerPixel, SDL_Surface::clip_rect, SDL_Surface::format, SDL_Rect::h, SDL_Surface::pitch, SDL_Surface::pixels, SDL_FillRect1(), SDL_FillRect2(), SDL_FillRect3(), SDL_FillRect4(), SDL_HasMMX(), SDL_HasSSE(), SDL_IntersectRect(), SDL_SetError(), switch(), SDL_Rect::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by _rotateSurface(), SDL_FillRects(), SDL_UnRLESurface(), and SW_RenderClear().
DECLSPEC int SDLCALL SDL_FillRects | ( | SDL_Surface * | dst, |
const SDL_Rect * | rects, | ||
int | count, | ||
Uint32 | color | ||
) |
Definition at line 436 of file SDL_fillrect.c.
References i, SDL_FillRect(), and SDL_SetError().
Referenced by SW_RenderFillRects().
DECLSPEC void SDLCALL SDL_FreeSurface | ( | SDL_Surface * | surface | ) |
Definition at line 1053 of file SDL_surface.c.
References SDL_Surface::flags, SDL_Surface::format, SDL_Surface::locked, SDL_Surface::map, NULL, SDL_Surface::pixels, SDL_Surface::refcount, SDL_DONTFREE, SDL_free(), SDL_FreeBlitMap(), SDL_FreeFormat(), SDL_PREALLOC, SDL_RLEACCEL, SDL_SetSurfacePalette(), SDL_UnlockSurface(), and SDL_UnRLESurface().
Referenced by _rotateSurface(), Zeni::Window::alert_window_resized(), cleanup(), SDL_CreateColorCursor(), SDL_CreateCursor(), SDL_CreateRGBSurface(), SDL_CreateTextureFromSurface(), SDL_DestroyWindow(), SDL_GetWindowSurface(), SDL_InvalidateMap(), SDL_LoadBMP_RW(), SDL_RecreateWindow(), SDL_SaveBMP_RW(), SDL_SetWindowIcon(), SDL_SW_DestroyYUVTexture(), SDL_SW_SetupYUVDisplay(), SDLTest_CommonInit(), SDLTest_DrawCharacter(), SW_DestroyTexture(), SW_RenderCopyEx(), and Zeni::Window::~Window().
DECLSPEC void SDLCALL SDL_GetClipRect | ( | SDL_Surface * | surface, |
SDL_Rect * | rect | ||
) |
Gets the clipping rectangle for the destination surface in a blit.
rect
must be a pointer to a valid rectangle which will be filled with the correct values.
Definition at line 477 of file SDL_surface.c.
References SDL_Surface::clip_rect.
DECLSPEC int SDLCALL SDL_GetColorKey | ( | SDL_Surface * | surface, |
Uint32 * | key | ||
) |
Gets the color key (transparent pixel) in a blittable surface.
surface | The surface to update |
key | A pointer filled in with the transparent pixel in the native surface format |
Definition at line 218 of file SDL_surface.c.
References SDL_BlitInfo::colorkey, SDL_BlitInfo::flags, SDL_BlitMap::info, SDL_Surface::map, and SDL_COPY_COLORKEY.
Referenced by _colorkey(), SDL_CreateTextureFromSurface(), and SW_RenderCopyEx().
DECLSPEC int SDLCALL SDL_GetSurfaceAlphaMod | ( | SDL_Surface * | surface, |
Uint8 * | alpha | ||
) |
Get the additional alpha value used in blit operations.
surface | The surface to query. |
alpha | A pointer filled in with the current alpha value. |
Definition at line 374 of file SDL_surface.c.
References SDL_BlitInfo::a, SDL_BlitMap::info, and SDL_Surface::map.
Referenced by SDL_CreateTextureFromSurface().
DECLSPEC int SDLCALL SDL_GetSurfaceBlendMode | ( | SDL_Surface * | surface, |
SDL_BlendMode * | blendMode | ||
) |
Get the blend mode used for blit operations.
surface | The surface to query. |
blendMode | A pointer filled in with the current blend mode. |
Definition at line 424 of file SDL_surface.c.
References SDL_Surface::map, SDL_BLENDMODE_ADD, SDL_BLENDMODE_BLEND, SDL_BLENDMODE_MOD, SDL_BLENDMODE_NONE, SDL_COPY_ADD, SDL_COPY_BLEND, and SDL_COPY_MOD.
Referenced by SDL_CreateTextureFromSurface().
DECLSPEC int SDLCALL SDL_GetSurfaceColorMod | ( | SDL_Surface * | surface, |
Uint8 * | r, | ||
Uint8 * | g, | ||
Uint8 * | b | ||
) |
Get the additional color value used in blit operations.
surface | The surface to query. |
r | A pointer filled in with the current red color value. |
g | A pointer filled in with the current green color value. |
b | A pointer filled in with the current blue color value. |
Definition at line 332 of file SDL_surface.c.
References SDL_BlitInfo::b, SDL_BlitInfo::g, SDL_BlitMap::info, SDL_Surface::map, and SDL_BlitInfo::r.
Referenced by SDL_CreateTextureFromSurface().
DECLSPEC SDL_Surface* SDLCALL SDL_LoadBMP_RW | ( | SDL_RWops * | src, |
int | freesrc | ||
) |
Load a surface from a seekable SDL data stream (memory or file).
If freesrc
is non-zero, the stream will be closed after being read.
The new surface should be freed with SDL_FreeSurface().
Definition at line 80 of file SDL_bmp.c.
References SDL_Color::a, SDL_Color::b, BI_BITFIELDS, BI_RGB, bits, SDL_Palette::colors, CorrectAlphaChannel(), SDL_Surface::format, SDL_Color::g, SDL_Surface::h, i, int, SDL_Palette::ncolors, NULL, pad, SDL_Surface::pitch, SDL_Surface::pixels, SDL_Color::r, RW_SEEK_SET, SDL_ALPHA_OPAQUE, SDL_ClearError(), SDL_CreateRGBSurface(), SDL_EFREAD, SDL_EFSEEK, SDL_Error(), SDL_FALSE, SDL_FreeSurface(), SDL_GetError(), SDL_OutOfMemory, SDL_ReadLE16(), SDL_ReadLE32(), SDL_realloc(), SDL_RWclose, SDL_RWread, SDL_RWseek, SDL_RWtell, SDL_SetError(), SDL_strcmp(), SDL_strncmp(), SDL_Swap16(), SDL_Swap32(), SDL_TRUE, and SDL_Surface::w.
DECLSPEC int SDLCALL SDL_LockSurface | ( | SDL_Surface * | surface | ) |
Sets up a surface for directly accessing the pixels.
Between calls to SDL_LockSurface() / SDL_UnlockSurface(), you can write to and read from surface->pixels
, using the pixel format stored in surface->format
. Once you are done accessing the surface, you should use SDL_UnlockSurface() to release it.
Not all surfaces require locking. If SDL_MUSTLOCK(surface) evaluates to 0, then you can read and write to the surface at any time, and the pixel format of the surface will not change.
No operating system or library calls should be made between lock/unlock pairs, as critical system locks may be held during this time.
SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked.
Definition at line 765 of file SDL_surface.c.
References SDL_Surface::flags, SDL_Surface::locked, SDL_RLEACCEL, and SDL_UnRLESurface().
Referenced by _rotateSurface(), SDL_CalculateShapeBitmap(), SDL_CalculateShapeTree(), SDL_ConvertColorkeyToAlpha(), SDL_CreateTextureFromSurface(), SDL_RLEAlphaBlit(), SDL_RLEBlit(), SDL_SaveBMP_RW(), SDL_SoftBlit(), SDL_SoftStretch(), SDLTest_CompareSurfaces(), and SW_UpdateTexture().
DECLSPEC int SDLCALL SDL_LowerBlit | ( | SDL_Surface * | src, |
SDL_Rect * | srcrect, | ||
SDL_Surface * | dst, | ||
SDL_Rect * | dstrect | ||
) |
This is a semi-private blit function and it performs low-level surface blitting only.
Definition at line 496 of file SDL_surface.c.
References SDL_BlitMap::blit, SDL_BlitMap::dst, SDL_BlitMap::dst_palette_version, SDL_Surface::format, SDL_Surface::map, SDL_PixelFormat::palette, SDL_MapSurface(), SDL_BlitMap::src_palette_version, and SDL_Palette::version.
Referenced by SDL_ConvertPixels(), SDL_ConvertSurface(), SDL_LowerBlitScaled(), and SDL_UpperBlit().
DECLSPEC int SDLCALL SDL_LowerBlitScaled | ( | SDL_Surface * | src, |
SDL_Rect * | srcrect, | ||
SDL_Surface * | dst, | ||
SDL_Rect * | dstrect | ||
) |
This is a semi-private blit function and it performs low-level surface scaled blitting only.
Definition at line 704 of file SDL_surface.c.
References SDL_Surface::clip_rect, SDL_BlitInfo::flags, SDL_Surface::format, SDL_PixelFormat::format, SDL_Rect::h, SDL_Surface::h, SDL_BlitMap::info, SDL_Surface::map, SDL_COPY_ADD, SDL_COPY_BLEND, SDL_COPY_COLORKEY, SDL_COPY_MOD, SDL_COPY_MODULATE_ALPHA, SDL_COPY_MODULATE_COLOR, SDL_COPY_NEAREST, SDL_IntersectRect(), SDL_ISPIXELFORMAT_INDEXED, SDL_LowerBlit(), SDL_SoftStretch(), SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by SDL_UpperBlitScaled().
Save a surface to a seekable SDL data stream (memory or file).
If freedst
is non-zero, the stream will be closed after being written.
Definition at line 411 of file SDL_bmp.c.
References SDL_PixelFormat::Amask, BI_RGB, bits, SDL_PixelFormat::BitsPerPixel, SDL_PixelFormat::Bmask, SDL_PixelFormat::BytesPerPixel, colors, SDL_Palette::colors, else, SDL_BlitInfo::flags, SDL_Surface::format, SDL_PixelFormat::Gmask, SDL_Surface::h, i, SDL_BlitMap::info, SDL_Surface::map, SDL_Palette::ncolors, NULL, pad, SDL_PixelFormat::palette, SDL_Surface::pitch, SDL_Surface::pixels, SDL_PixelFormat::Rmask, RW_SEEK_SET, SDL_BYTEORDER, SDL_ClearError(), SDL_ConvertSurface(), SDL_COPY_COLORKEY, SDL_EFSEEK, SDL_EFWRITE, SDL_Error(), SDL_FALSE, SDL_FreeSurface(), SDL_GetError(), SDL_InitFormat(), SDL_LIL_ENDIAN, SDL_LockSurface(), SDL_PIXELFORMAT_ARGB8888, SDL_PIXELFORMAT_BGR24, SDL_PIXELFORMAT_BGRA8888, SDL_RWclose, SDL_RWseek, SDL_RWtell, SDL_RWwrite, SDL_SetError(), SDL_strcmp(), SDL_TRUE, SDL_UnlockSurface(), SDL_WriteLE16(), SDL_WriteLE32(), and SDL_Surface::w.
Sets the clipping rectangle for the destination surface in a blit.
If the clip rectangle is NULL, clipping will be disabled.
If the clip rectangle doesn't intersect the surface, the function will return SDL_FALSE and blits will be completely clipped. Otherwise the function returns SDL_TRUE and blits to the surface will be clipped to the intersection of the surface area and the clipping rectangle.
Note that blits are automatically clipped to the edges of the source and destination surfaces.
Definition at line 453 of file SDL_surface.c.
References SDL_Surface::clip_rect, SDL_Rect::h, SDL_Surface::h, SDL_FALSE, SDL_IntersectRect(), SDL_TRUE, SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by SDL_ConvertSurface(), SDL_CreateRGBSurface(), SDL_CreateRGBSurfaceFrom(), SW_RenderClear(), SW_UpdateClipRect(), and SW_UpdateViewport().
Sets the color key (transparent pixel) in a blittable surface.
surface | The surface to update |
flag | Non-zero to enable colorkey and 0 to disable colorkey |
key | The transparent pixel in the native surface format |
You can pass SDL_RLEACCEL to enable RLE accelerated blits.
Definition at line 173 of file SDL_surface.c.
References SDL_Color::a, SDL_BlitInfo::colorkey, SDL_Palette::colors, SDL_BlitInfo::flags, SDL_Surface::format, SDL_BlitMap::info, SDL_Surface::map, SDL_Palette::ncolors, SDL_PixelFormat::palette, SDL_ALPHA_OPAQUE, SDL_ALPHA_TRANSPARENT, SDL_COPY_COLORKEY, SDL_InvalidateMap(), SDL_InvalidParamError, SDL_RLEACCEL, SDL_SetSurfaceRLE(), and SDL_Palette::version.
Referenced by _rotateSurface(), SDL_ConvertColorkeyToAlpha(), SDL_ConvertSurface(), SDLTest_LoadIcon(), and SW_RenderCopyEx().
DECLSPEC int SDLCALL SDL_SetSurfaceAlphaMod | ( | SDL_Surface * | surface, |
Uint8 | alpha | ||
) |
Set an additional alpha value used in blit operations.
surface | The surface to update. |
alpha | The alpha value multiplied into blit operations. |
Definition at line 351 of file SDL_surface.c.
References SDL_BlitInfo::a, SDL_BlitInfo::flags, SDL_BlitMap::info, SDL_Surface::map, SDL_COPY_MODULATE_ALPHA, and SDL_InvalidateMap().
Referenced by SW_CreateTexture(), and SW_SetTextureAlphaMod().
DECLSPEC int SDLCALL SDL_SetSurfaceBlendMode | ( | SDL_Surface * | surface, |
SDL_BlendMode | blendMode | ||
) |
Set the blend mode used for blit operations.
surface | The surface to update. |
blendMode | SDL_BlendMode to use for blit blending. |
Definition at line 387 of file SDL_surface.c.
References SDL_BlitInfo::flags, SDL_BlitMap::info, SDL_Surface::map, SDL_BLENDMODE_ADD, SDL_BLENDMODE_BLEND, SDL_BLENDMODE_MOD, SDL_BLENDMODE_NONE, SDL_COPY_ADD, SDL_COPY_BLEND, SDL_COPY_MOD, SDL_InvalidateMap(), and SDL_Unsupported.
Referenced by SDL_ConvertColorkeyToAlpha(), SDL_ConvertSurface(), SDL_CreateRGBSurface(), SW_CreateTexture(), and SW_SetTextureBlendMode().
Set an additional color value used in blit operations.
surface | The surface to update. |
r | The red color value multiplied into blit operations. |
g | The green color value multiplied into blit operations. |
b | The blue color value multiplied into blit operations. |
Definition at line 306 of file SDL_surface.c.
References SDL_BlitInfo::b, SDL_BlitInfo::flags, SDL_BlitInfo::g, SDL_BlitMap::info, SDL_Surface::map, SDL_BlitInfo::r, SDL_COPY_MODULATE_COLOR, and SDL_InvalidateMap().
Referenced by SW_CreateTexture(), and SW_SetTextureColorMod().
DECLSPEC int SDLCALL SDL_SetSurfacePalette | ( | SDL_Surface * | surface, |
SDL_Palette * | palette | ||
) |
Set the palette used by a surface.
Definition at line 143 of file SDL_surface.c.
References SDL_Surface::format, SDL_SetError(), and SDL_SetPixelFormatPalette().
Referenced by SDL_CreateRGBSurface(), and SDL_FreeSurface().
DECLSPEC int SDLCALL SDL_SetSurfaceRLE | ( | SDL_Surface * | surface, |
int | flag | ||
) |
Sets the RLE acceleration hint for a surface.
Definition at line 152 of file SDL_surface.c.
References SDL_BlitInfo::flags, SDL_BlitMap::info, SDL_Surface::map, SDL_COPY_RLE_DESIRED, and SDL_InvalidateMap().
Referenced by SDL_ConvertSurface(), SDL_SetColorKey(), and SW_CreateTexture().
DECLSPEC int SDLCALL SDL_SoftStretch | ( | SDL_Surface * | src, |
const SDL_Rect * | srcrect, | ||
SDL_Surface * | dst, | ||
const SDL_Rect * | dstrect | ||
) |
Perform a fast, low quality, stretch blit between two surfaces of the same pixel format.
Definition at line 203 of file SDL_stretch.c.
References SDL_PixelFormat::BytesPerPixel, copy_row3(), SDL_Surface::format, SDL_PixelFormat::format, SDL_Rect::h, SDL_Surface::h, if(), NULL, SDL_Surface::pitch, SDL_Surface::pixels, pop, SDL_FALSE, SDL_LockSurface(), SDL_MUSTLOCK, SDL_SetError(), SDL_TRUE, SDL_UnlockSurface(), SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.
Referenced by SDL_LowerBlitScaled(), and SDL_SW_CopyYUVToRGB().
DECLSPEC void SDLCALL SDL_UnlockSurface | ( | SDL_Surface * | surface | ) |
Definition at line 786 of file SDL_surface.c.
References SDL_Surface::flags, SDL_Surface::locked, SDL_RLEACCEL, and SDL_RLESurface().
Referenced by _rotateSurface(), SDL_CalculateShapeBitmap(), SDL_CalculateShapeTree(), SDL_ConvertColorkeyToAlpha(), SDL_CreateTextureFromSurface(), SDL_FreeSurface(), SDL_RLEAlphaBlit(), SDL_RLEBlit(), SDL_SaveBMP_RW(), SDL_SoftBlit(), SDL_SoftStretch(), SDLTest_CompareSurfaces(), and SW_UpdateTexture().
DECLSPEC int SDLCALL SDL_UpperBlit | ( | SDL_Surface * | src, |
const SDL_Rect * | srcrect, | ||
SDL_Surface * | dst, | ||
SDL_Rect * | dstrect | ||
) |
This is the public blit function, SDL_BlitSurface(), and it performs rectangle validation and clipping before passing it to SDL_LowerBlit()
Definition at line 519 of file SDL_surface.c.
References SDL_Surface::clip_rect, SDL_Rect::h, SDL_Surface::h, SDL_Surface::locked, NULL, SDL_LowerBlit(), SDL_SetError(), SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.
DECLSPEC int SDLCALL SDL_UpperBlitScaled | ( | SDL_Surface * | src, |
const SDL_Rect * | srcrect, | ||
SDL_Surface * | dst, | ||
SDL_Rect * | dstrect | ||
) |
This is the public scaled blit function, SDL_BlitScaled(), and it performs rectangle validation and clipping before passing it to SDL_LowerBlitScaled()
Definition at line 612 of file SDL_surface.c.
References SDL_Rect::h, SDL_Surface::h, SDL_Surface::locked, NULL, SDL_LowerBlitScaled(), SDL_SetError(), SDL_Rect::w, SDL_Surface::w, SDL_Rect::x, and SDL_Rect::y.