Publications ]
|
|
|
PUBLICATIONS
1. D. A. Dornfeld, and E. Kannatey-Asibu, Jr., "Acoustic`Emission During Orthogonal Metal Cutting," Int'l. Journal of Mech., Vol. 22, pp. 285-296, 1980. 2. E. Kannatey-Asibu, Jr., and D. A. Dornfeld, "Quantitative Relationships for Acoustic Emission from Orthogonal Metal Cutting," ASME J. Eng. for Ind., Vol. 103, pp. 330-340, 1981. 3. E. Kannatey-Asibu, Jr., and D. A. Dornfeld, "A Study of Tool Wear Using Statistical Analysis of Metal Cutting Acoustic Emission," Wear, Vol. 76, pp. 247-261, 1982. 4. E. Kannatey-Asibu, Jr., "Acoustic Emission Sensing of Tool Wear in Metal Cutting - A General Overview and Problem Areas," SME Transactions, Vol. 10, pp. 55-59, 1982. 5. E. Kannatey-Asibu, Jr., "A Characteristic Study of the Superconducting (A-15) Phase in the Nb-Al-Ge Superconducting System," J. Applied Physics, Vol. 56, No. 6, pp. 1769--1774, 1984. 6. E. Kannatey-Asibu, Jr., "A Transport-Diffusion Equation in Metal Cutting and Its Application to Analysis of the Rate of Tool Wear," ASME J. Eng. for Ind., Vol. 107, pp. 81-89, 1985. 7. E. Kannatey-Asibu, Jr., and Dong, Pingsha, "Analysis of Acoustic Emission Signal Generation During Martensitic Transformation," ASME J. Eng. for Ind., Vol. 108, pp. 328-331, 1986. 8. E. Kannatey-Asibu, Jr., "Analysis of the GMAW Process for Microprocessor Control of Arc Length," ASME J. Eng. for Ind., Vol. 109, pp. 172-176, 1987. 9. E. Kannatey-Asibu, Jr., and E. Emel, "Linear Discriminant Function Analysis of Acoustic Emission Signals for Tool Condition Monitoring," Journal of Mechanical Systems and Signal Processing, Vol. 1, No. 4, pp. 333-347, 1987. 10. E. Emel, and E. Kannatey-Asibu, Jr., " Tool Failure Monitoring in Turning by Pattern Recognition Analysis of Acoustic Emission Signals," ASME J. Eng. for Ind., Vol. 110, pp. 137-145, 1988. (Also appeared in Sensors for Manufacturing, ASME WAM, D. A. Dornfeld, and M. Tse, eds., pp. 39-57, Dec. 1987.) 11. E. Kannatey-Asibu, Jr., N. Kikuchi, and A. R. Jallad, "Experimental Finite Element Analysis of Temperature Distribution During Arc Welding," ASME J. Eng. Mat. and Tech., Vol. 111, pp. 9-18, 1989. (Also appeared in Sensors and Controls for Manufacturing, ASME WAM, E. Kannatey-Asibu, Jr., Y. Koren, and J. Stein, eds., pp. 1-15, Dec. 1988. ) 12. A. Houshmand, and E. Kannatey-Asibu, Jr., "Statistical Process Control of AE for Monitoring Cutting Tools," Journal of Mechanical Systems and Signal Processing, Vol. 3, No. 4, pp. 405-424, 1989. 13. E. Emel, and E. Kannatey-Asibu, Jr., "Acoustic Emission and Force Sensor Fusion for Monitoring the Cutting Process," International Journal of Mechanical Sciences, Vol. 31, No. 11/12, pp. 795-809, 1989. (Also appeared in Proc., International Conference on Computer-Aided Production Engineering, Ann Arbor, MI, June 1988, pp. 171-187. ) 14. X. Liu, and E. Kannatey-Asibu, Jr., "Acoustic Emission During Athermal Martensitic Transformation in Steels," ASME J. Eng. for Ind., Vol. 112, pp. 84--91, 1990. (Also appeared in Sensors for Manufacturing, ASME WAM, Dornfeld, D. A., and Tse, M., eds., pp. 197-213, Dec. 1987.) 15. E. Kannatey-Asibu, Jr., "On the Performance of the Silicon Nitride Cutting Tool in Machining Steel," Journal of Manufacturing Systems, Vol. 9, No. 2, pp. 159-168, 1990. 16. X. Liu, and E. Kannatey-Asibu, Jr., "Classification of AE Signals for Martensite Formation from Welding," Welding Journal, Vol. 69, No. 10, pp. 389s-394s, 1990. 17. A. L. Purvis, E. Kannatey-Asibu, Jr., and R. Pehlke, "Evaluation of Acoustic Emission from Sand Cast Aluminum Alloy 319 During Solidification and Formation of Casting Defects," Trans. American Foundrymen Society, Vol. 98, pp. 1-7, 1990. 18. E. Kannatey-Asibu, Jr., "Thermal Aspects of the Split-Beam Laser Welding Concept," ASME J. Eng. Mat. and Tech., Vol. 113, pp. 215-221, 1991. (Also appeared in Modeling of Machine Tools: Accuracy, Dynamics, and Control, ASME WAM, P. M. Ferreira, S. G. Kapoor, and A. C.-Y. Wang, editors, ASME Publication No. PED-Vol. 45, pp. 175-190, Dec. 1990.) 19. M. Schumack, J. B. Chung, W. Schultz, and E. Kannatey-Asibu, Jr., "Analysis of Fluid Flow During Grinding," ASME J. Eng. Ind., Vol. 113, pp. 190-197, 1991. (Also appeared in Tribological Aspects in Manufacturing, ASME WAM, M. H. Attia, and R. Komanduri, editors, ASME Publication, pp. 25-40.) 20. H. Trabelsi, and E. Kannatey-Asibu, Jr., "Pattern Recognition Analysis of Sound Radiation in Metal Cutting," Int'l J. of Adv. Manuf. Tech., Vol. 6, No. 3, pp. 220-231, 1991. 21. S.,Rhee, and E. Kannatey-Asibu, Jr., "Analysis of Arc Pressure Effect on Metal Transfer in Gas Metal Arc Welding," J. Applied Physics, Vol. 70, No.9, pp. 5068-5075, 1991. (Also appeared in Welding and Joining Processes, ASME WAM, E. Kannatey-Asibu, Jr., H. S. Cho, and Fukuda, editors, ASME Publication, pp. 1-16, 1991.) 22. E. Emel, and E. Kannatey-Asibu, Jr., "Acoustic Emission Monitoring of the Cutting Process - Negating the Influence of Process Variables," ASME J. Eng. Mat. and Tech., Vol. 113, pp. 456-464, 1991. (Also appeared in Sensors and Controls for Manufacturing, ASME WAM, E. Kannatey-Asibu, Jr., Y. Koren, and J. Stein, eds., pp. 63-74, Dec. 1988. ) 23. X. Liu, and E. Kannatey-Asibu, Jr., "Acoustic Emission from Single Plate Martensitic Transformation," ASME J. Appl. Mech., Vol. 58, pp. 889--894, 1991. (Also appeared in Monitoring and Control for Manufacturing Processes, ASME WAM, Liang, S. Y., and Tsao, T.-C., editors, ASME Publication No. PED-Vol. 44, pp. 163-176, Dec. 1990.) 24. A. L. Purvis, E. Kannatey-Asibu, Jr., and R. Pehlke, "Acoustic Emission Signal Characteristics from Casting Defects Formed During Solidification of Aluminum Alloy 319," Trans. American Foundrymen Society, Vol. 99, pp. 525-530, 1991. 25. S. Rhee, and E. Kannatey-Asibu, Jr., "Observation of Metal Transfer in Gas Metal Arc Welding," Welding Journal, Vol. 71, pp. 381s-386s, 1992. (Also appeared in Welding and Joining Processes, ASME WAM, E. Kannatey-Asibu, Jr., H. S. Cho, and Fukuda, editors, ASME Publication, pp. 203-213, 1991.) 26. J. Chung, and E. Kannatey-Asibu, Jr., "Acoustic Emission from Plastic Deformation of a Pure Single Crystal," J. Applied Physics, Vol. 72, No. 5, pp. 1812--1820, 1992. (Also appeared in Proceedings of the 1st International Conference on Acoustic Emission in Manufacturing, Boston, MA, pp. 33-41, 1991.) 27. A. L. Purvis, E. Kannatey-Asibu, Jr., and R. Pehlke, "Numerical Simulation of Solidification and Thermal Stresses During Solidification of a Restrained Bar Test Casting," Trans. American Foundrymen Society, Vol.100, pp. 593-600, 1992. 28. Y-N. Liu, and E. Kannatey-Asibu, Jr., "Laser Beam Welding with Simultaneous Gaussian Laser Preheating," ASME Journal of Heat Transfer, Vol. 115, pp. 34-41, 1993. (Also appeared in Precision Machining, ASME WAM, M. Jouaneh and S. S. Rangwala, editors, ASME Publication, pp. 191-202, 1992.) 29. S. Rhee, and E. Kannatey-Asibu, Jr., "Melting Rate and Heat Flow for Wire Electrode in GMAW," Joining Sciences, Vol. 1, No. 4, pp. 231-236, 1993. 30. Tien-Ching Chen, and E. Kannatey-Asibu, Jr., "Dual Beam Laser Systems and Their Impact on Weld Pool Convection and Surface Deformation," Transactions of NAMRI, pp. 151-156, 1995. 31. C.-K. Fang, E. Kannatey-Asibu, Jr., and J. Barber, "Acoustic Emission Investigation of Cold Cracking in Gas Metal Arc Welding of AISI 4340 Steel," Welding Journal, Vol. 74, pp. 177s-184s, 1995. 32. J. Mimatsu, J. A. Bos, E. Kannatey-Asibu, Jr., and M. M. Chen, "Determination of Energy Absorption during Laser Welding by an Iterative Conduction Method," Journal of Laser Applications, Vol. 7, pp. 162-168, 1995. 33. A. L. Purvis, E. Kannatey-Asibu, Jr., and R. Pehlke, "Linear Discriminant Function Analysis of Acoustic Emission Signals Generated During Solidification," Trans. American Foundrymen Society, Vol. 103, pp. 1-8, 1995. 34. A. Houshmand, G. Herring, and E. Kannatey-Asibu, Jr., "A Dynamic Model for Tool Wear Detection Using Acoustic Emission," Journal of Mechanical Systems and Signal Processing, Vol. 9, No. 4, pp. 415-428, 1995. 35. Tien-Ching Chen, and E. Kannatey-Asibu, Jr., "Convection Pattern and Weld Pool Shape During Conduction-Mode Dual Beam Laser Welding," Transactions of NAMRI, pp. 259-265, 1996. 36. E. Kannatey-Asibu, Jr., "Milestone Developments in Welding and Joining Processes," ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 801-810, 1997. 37. C.-K. Fang, E. Kannatey-Asibu, Jr., and J. Barber, "Far-Field Initial Response of Acoustic Emission from Cracking in a Weldment," ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 281-289, 1997. 38. Y-N. Liu, and E. Kannatey-Asibu, Jr., "Experimental Study of Dual-Beam Laser Welding of AISI 4140 Steel," Welding Journal, Vol. 76, pp. 342s-348s, 1997. 39. C.-K. Fang, E. Kannatey-Asibu, Jr., and J. Barber, "Crack-Tip Equation of Motion Due to Non-Uniform Residual Stress in a Weldment," Welding Journal, , Vol. 76, pp. 374s-382s, 1997. (Also appeared in Proceedings of the First S. M. Wu Symposium on Manufacturing Science, Northwestern University, Evanston, Il., May 27-28, 1994, pp. 261-268.) 40. Y-N. Liu, and E. Kannatey-Asibu, Jr., "Finite Element Analysis of Heat Flow in Dual-Beam Laser Welded Tailored Blanks," ASME Journal of Manufacturing Science and Engineering, Vol. 120, pp. 272-278, 1998. 41. A. Sun, M. Gartner, and E. Kannatey-Asibu, Jr., "Sensor Systems for Real Time Monitoring of (Laser) Weld Quality," Journal of Laser Applications, Vol. 11, No. 4, pp. 153-168, 1999. 42. Fuu-Ren Tsai, and E. Kannatey-Asibu, Jr., "Modeling of Conduction Mode Laser Welding Process For Feedback Control," ASME Journal of Manufacturing Science and Engineering, Vol. 122, pp. 420-428, 2000. 43. Ming-Chyuan, Lu, and E. Kannatey-Asibu, Jr., "Analysis of Sound Signal Characteristics Associated with Adhesive Wear in Machining," Transactions of NAMRI, Vol. XXVIII, pp. 257-262, 2000. 44. E. Kannatey-Asibu, Jr., "Multiple-Beam Materials Processing," An International Journal of High Temperature Material Processes, Vol. 4, No. 2, pp. 291-307, 2000. 45. L. Wang, M. G. Mehrabi, and E. Kannatey-Asibu, Jr., "Tool Wear Monitoring In Reconfigurable Machining Systems Through Wavelet Analysis," Transactions of NAMRI, Vol. XXIX, 2001, pp. 399-406. 46. M. G. Mehrabi, and E. Kannatey-Asibu, Jr., "Mapping Theory: A New Approach to Design of Multi-Sensor Monitoring of Reconfigurable Machining Systems (RmS)," Journal of Manufacturing Systems, Vol. 20, No. 6, 2001, pp. 297-304. 47. Meng-Yen Li, and E. Kannatey-Asibu, Jr., "Monte Carlo Simulation of Heat-Affected Zone Microstructure in Laser Welded Nickel Sheet," Welding Journal, Vol. 81, 2002, pp. 37s-44s. 48. Chang-Sheng Chien, and E. Kannatey-Asibu, Jr., "Investigation of Monitoring Systems for Resistance Spot Welding," Welding Journal, Vol. 81, 2002, pp. 195s-199s. 49. Sun, A., Kannatey-Asibu, Jr., E., Gartner, M., "Monitoring of Laser Weld Penetration Using Sensor Fusion," Journal of Laser Applications, Vol. 14, No. 2, 2002, pp. 114-121. 50. L. Wang, M. G. Mehrabi, and E. Kannatey-Asibu, Jr., "Hidden Markov Model-based Tool Wear Monitoring in Machining," ASME Journal of Manufacturing Science and Engineering, Vol. 124, 2002, pp. 651-658. 51. Ming-Chyuan, Lu, and E. Kannatey-Asibu, Jr., "Analysis of Sound Signal Generation Due to Flank Wear in Turning," ASME Journal of Manufacturing Science and Engineering, Vol. 124, 2002, pp. 799-808.
52. L. Wang, M. G. Mehrabi, and E. Kannatey-Asibu, Jr., "A Method for Sensor Selection in Reconfigurable Process Monitoring," ASME Journal of Manufacturing Science and Engineering, Vol. 125, 2003, pp. 95-99. 53. Tien-Ching Chen, and E. Kannatey-Asibu, Jr., "Dual Beam Laser Control of Flow in the Weld Pool," Welding Journal, in press. 54. Fuu-Ren Tsai, and E. Kannatey-Asibu, Jr., "Image Detection of Laser Weld Pool," Journal of Laser Applications, 2002, in press. 55. Wang, F., Hou, W.K., Hu, S.J, Kannatey-Asibu, E., Schultz, W.W., and Wang, P.C., "Modeling and Analysis of Metal Transfer in Gas Metal Arc Welding," J. Phys. D: Appl. Phys. Vol. 36, 1143-1152, 2003. 56. Ming-Chyuan, Lu, and E. Kannatey-Asibu, Jr., "Flank Wear Effect On System Dynamics In Turning," ASME Journal of Manufacturing Science and Engineering, Vol. 126, pp. XX-XX, 2004.
1. E. Kannatey-Asibu, Jr., "On the Application of the Pattern Recognition Method to Manufacturing Process Monitoring," Proceedings of the 10th North American Manufacturing Research Conference, pp.487-492, May 1982. 2. E. Kannatey-Asibu, Jr., "The Metal Cutting Optimal Control Problem--A State Space Formulation," Control of Manufacturing Processes and Robotic Systems, ASME WAM, D. E. Hardt, and W. J. Book, editors, pp. 65-77, Nov. 1983. 3. E. Emel, And E. Kannatey-Asibu, Jr., "Characterization of Tool Wear and Breakage by Pattern Recognition Analysis of Acoustic Emission Signals," Proceedings of the 14th North American Manufacturing Research Conference, pp. 266-272, May 1986. 4. E. Kannatey-Asibu, Jr., "Microprocessor Control of Arc Length During Gas Metal Arc Welding," Proceedings of the 1986 NSF Manufacturing Systems Conference, Gainesville, Florida, pp. 53-59, Nov. 1986. 5. K. Ogilvie, and E. Kannatey-Asibu, Jr., "Microprocessor Control of a Constant Current Gas Metal Arc Welding System," Modeling, Sensing, and Control of Manufacturing Processes, Srinivasan, Hardt, and Komanduri, editors, ASME Publication No. PED-Vol. 23, pp. 65-82, 1986. 6. E. Kannatey-Asibu, Jr., "Analysis and Control of Arc Length During Gas Metal Arc Welding," Proceedings of the 1987 NSF Manufacturing Systems Research Conference, Ann Arbor, Michigan, Oct. 1987. 7. E. Kannatey-Asibu, Jr., T. Mileta, and K. Ogilvie, "Control of Arc Length for a Consummable Electrode Welding System," Proceedings of the USA-Japan Symposium on Flexible Automation, Minneapolis, MN, pp. 1035-1046, 1988. 8. E. Kannatey-Asibu, Jr., "Dynamics of Electrode Extension -- Application to Arc Length Control," Proceedings of the 1989 NSF Manufacturing Systems Research Conference, University of California, Berkeley, CA, pp. 407-411, 1989. 9. P. Balakrishnan, E. Kannatey-Asibu, Jr., H. Trabelsi, and E. Emel, "A Sensor Fusion Approach to Cutting Tool Monitoring," Proceedings of the 1989 NSF Manufacturing Systems Research Conference, University of California, Berkeley, CA, pp. 101-108, 1989. 10. E. Kannatey-Asibu, Jr., "Split-Beam Laser Welding," Proceedings of the 2nd International Conference on Trends in Welding Research, Gatlinburg, Tennessee, pp. 443-451, May 1989. 11. E. Kannatey-Asibu, Jr., "Analysis of Split-Beam Laser Welding," Proceedings of the Japan-USA Symposium on Flexible Automation, Kyoto, Japan, pp. 771-774, June 1990. 12. H. Trabelsi, and E. Kannatey-Asibu, Jr., "Tool Wear and Sound Radiation in Metal Cutting," Modeling of Machine Tools: Accuracy, Dynamics, and Control, ASME WAM, P. M. Ferreira, S. G. Kapoor, and A. C.-Y. Wang, editors, ASME Publication No. PED-Vol. 45, pp. 121-131, Dec. 1990. 13. J-B. Chung, and E. Kannatey-Asibu, Jr., "Micromechanistic Analysis of Acoustic Emission from Metal Cutting," Proceedings of the 1st International Conference on Acoustic Emission in Manufacturing, pp. 261-268, 1991. 14. J-B. Chung, and E. Kannatey-Asibu, Jr., "Acoustic Emission from Plastic Deformation of a Crystalline Alloy," Sensors, Controls, and Quality Issues in Manufacturing, T. I. Liu, editor, ASME Publication, pp. 23-35, 1991. 15. A. A. Houshmand, G. D. Herrin, and E. Kannatey-Asibu, Jr., "A Dynamic Model for Tool Wear Detection Using Acoustic Emission," Control of Manufacturing Processes, ASME WAM, D. Kourosh, and S. Malkin, editors, ASME Publication, pp. 13-22, 1991. 16. E. Kannatey-Asibu, Yu-Ning Liu, and Meng-Yen Li, "Laser Beam-Splitting and Materials Processing," Proceedings of the 1993 NSF Manufacturing Systems Research Conference, University of North Carolina, Charlotte, NC, pp. 201--208, 1993. 17. Y-N. Liu, and E. Kannatey-Asibu, Jr., "Characteristics of Elliptical Laser Beam Pre-Heating During Laser Welding," Welding And Joining Processes, ASME WAM, T. Moon, E. Kannatey-Asibu, Jr., H. S. Cho, and S. Fukuda, editors, ASME Publication, 1993, pp. 895-905. 18. Yu-Ning Liu, and E. Kannatey-Asibu, Jr., "Finite Element Analysis of Heat Flow in Dual-Beam Laser Welded Tailored Blanks," Proceedings of ICALEO 94, Orlando, Florida, 1994, pp. 694-703. 19. Meng-Yen Li, and E. Kannatey-Asibu, Jr., "Computational Heat Affected Zone Microstructure Simulation - Normal Grain Growth," Proceedings of ICALEO 94, Orlando, Florida, 1994, pp. 658-667. 20. Tien-Ching Chen, and E. Kannatey-Asibu, Jr., "Impact of Dual Beams on Flow Characteristics in Weld Pool," Proceedings of ICALEO 94, Orlando, Florida, 1994, pp. 668-677. 21. Tien-Ching Chen, and E. Kannatey-Asibu, Jr., "Multiple-Beams and Laser Materials Processing," Proceedings of 3rd Africa-USA International Conference on Manufacturing Technology, Accra, Ghana, 1996, pp. 222-244. 22. Meng-Yen Li, and E. Kannatey-Asibu, Jr., "Monte Carlo Simulation of Weldment Microstructure," Proceedings of 3rd Africa-USA International Conference on Manufacturing Technology, Accra, Ghana, 1996, pp. 45-60. 23. Tien-Ching Chen, E. Kannatey-Asibu, Jr., and Chen, M. M., "High-Resolution Computations of Thermocapillary Convection in the Laser Weld Pool," Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exposition. Atlanta, GA, HTD Vol. 336, 1996, pp. 113-120. 24. E. Kannatey-Asibu, Jr., "A Curriculum on Lasers in Manufacturing," Electronic Proceedings of The NSF Engineering Education Innovators’ Conference, April 7-8, Arlington, VA, 1997. 25. E. Kannatey-Asibu, Jr., "Multi-Media Developments for a Laser Processing Curriculum," Manufacturing Science and Engineering, 1997 ASME International Mechanical Engineering Congress and Exposition, Dallas, TX, MED Vol. 6-1, 1997, pp. 455-459. 26. Chang-Sheng Chien, and E. Kannatey-Asibu, Jr., "Acoustic Emission Signal Generation During Resistance Spot Welding: The One-Dimensional Case," 5th International Conference on Trends in Welding Research, June 1-5, 1998, Callaway Garden Resort, Pine Mountain, Georgia. 27. E. Kannatey-Asibu, Jr., "New Concepts on Multi-Sensor Monitoring for Reconfigurable Machining Systems," Manufacturing Science and Engineering, 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED Vol. 8, 1998, pp. 589-594. 28. E. T. Smith, W. Schultz, and E. Kannatey-Asibu, Jr., "Modeling Oscillations During Conduction Mode Laser Welding," Manufacturing Science and Engineering, 1999 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED Vol. 10, 1999, pp. 639-648. 29. M.G. Mehrabi and E. Kannatey-Asibu, Jr., "Mapping Theory: A New Concept in Multi-Sensor Process Monitoring Systems," IMS Conf. on Sensor Fused Intelligent Monitoring Systems, 1999, Leuvean, Belgium. 30. Dhandapani, S., Bridges, M. M., and E. Kannatey-Asibu, Jr., "Nonlinear Electrical Modeling for the Resistance Spot Welding Process," Proc. ACC 1: 182-186, San Diego, CA, June 1999. 31. L. Wang, M. G. Mehrabi, and E. Kannatey-Asibu, Jr., "Optimal Sensor Selection for Reconfigurable Process Monitoring," 2000 Japan-USA Symposium on Flexible Manufacturing and Automation, Ann Arbor, MI, 2000. Also submitted to ASME Journal of Manufacturing Science and Engineering. 32. A. Sun, M. Gartner, and E. Kannatey-Asibu, Jr., "Real-time Monitoring of Laser Weld Penetration Using Sensor Fusion," ICALEO 2000, pp. E24-E34, 2000. 33. A. Sun, M. Gartner, and E. Kannatey-Asibu, Jr., "Real-time Monitoring of Porosity in Laser Welding Using Sensor Fusion," Mechatronics 2000. 34. Sun, A., Kannatey-Asibu, E., Gartner, M., and Williams, W., 2001, "Time-Frequency Analysis of Laser Weld Signature," Proceedings of SPIE Advanced Signal Processing Algorithms, Architectures, and Implementations XI, Vol. 4474, pp. 103-114. 35. Wang, L., Mehrabi, M.G., and E. Kannatey-Asibu, Jr., 2002, "Adaptive Process Monitoring for Tool Wear," 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan. 36. Mehrabi, M.G., and E. Kannatey-Asibu, Jr., 2002, "A New Methodology for Sensor Selection in Process Monitoring of Reconfigurable Machining Systems (RmSs)," Proceedings of IMECE02, New Orleans, Louisiana, IMECE2002-MED-32869.
|